Handling Precautions - Canon WP-DC32 User Manual

• Do not press the buttons or the lever of the
Waterproof Case with unnecessary force when
in the water. This may warp the casing and
cause leaks.
• When cleaning the case, do not spray water at
the waterproof seal under pressure. This may
cause leaks.
• Do not disassemble or modify the Waterproof
Case. This may cause leaks.
• Do not damage the waterproof seal, scratch its
contact surfaces, or allow dirt, sand, hair or
other debris to accumulate between the
waterproof seal and the case. This may cause
leaks.
• Do not use the Waterproof Case in water at
temperatures above 40 °C (104 °F). Heat may
warp the casing and cause leaks.
• Do not leave the Waterproof Case in direct
sunlight, inside a car in hot weather, or near a
heater. Heat may warp the casing and cause
leaks. Cover it with a towel, for example, if you
have to leave it in the sun.
4

Handling Precautions

• Do not drop or throw the Waterproof Case.
• Use only the supplied silicone grease. Use of
other waterproofing products may impair the
strength of the Waterproof Case. If any other
waterproofing product is mistakenly applied,
wipe it off immediately.
• Avoid opening or closing the Waterproof Case
near water. When you are installing the camera
or changing the memory card or the battery,
choose a place with low humidity well away from
salty sea air.
• Avoid using the Waterproof Case for long
periods of time in hot temperatures.
• Battery life is reduced in cold temperatures.
When you use the Waterproof Case in very cold
places, keep it warm by putting it in a bag
whenever you are not shooting. It is not
advisable to use the Waterproof Case in
temperatures below the freezing point.