Before Operation; Unpacking Instructions; Proper Laser Set Up & Usage - Beamz 152.870 Instruction Manual


The ambient temperature must be between 10℃ to 40℃.

Please use the original packaging if the device is to be transported.

Please consider that unauthorized modifications on the device are forbidden due
to safety reasons!
CAUTION! Operate the device only after having familiarized with its
functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the
result of unprofessional operation!
CAUTION! If this device will be operated in any way different to the
one described in this manual, the product may suffer
damages and the warranty void.

BEFORE OPERATION

Unpacking Instructions

CAUTION!
Immediately upon receiving a fixture, carefully unpack the carton, check the contents
to ensure that all parts are present, and have been received in good condition. Notify
the shipper immediately and retain packing material for inspection if any parts appear
damage from shipping or the package itself shows signs of mishandling. Save the
package and all packing materials. In the event that a fixture must be returned to the
factory, it is important that the fixture be returned in the original factory box and
packing.
Proper Laser Set Up & Usage
This fixture has been designed to be hung. It is recommended for safety purposes,
your lighting effect are properly mounted using a suitable hanging clamp and safety
cable. Items appropriate for safe and effective mounting are easily sourced from your
lighting vendor.
International laser safety regulations require that lasers must be operated in the
fashion illustrated below, with a minimum of 3 meters (9.8 ft) of vertical separation
between the floor and the lowest laser light vertically. Additionally, 2.5 meters of
horizontal separation is required between laser light and audience or other public
spaces.