Advertisement
1.2 System, Region Code, etc. Setting Procedure
Procedure to change region code of your DVD Portable
1. Power ON the DVD player and do not insert DISC inside player
2. Setup
Prefer
9
6 5 3
The LCD display showed the existing region Code
3. Press▲(navigation up)or▼(navigation down)
repeatedly to select the number from 1 to 6.
4. Then press OK to confirm your region code.
5. Refer below table for your region code setting
Procedure for SW upgrade
1. The upgrade will provide a document re-named: PHILIPS.BIN
2. "PHILIPS.BIN" copy to CD-ROM into the data;
3. Reading the CD-ROM，in accordance with prompt，press "OK" key to upgrade
Warning: Do not unplug the AC adapter during firmware upgrade to prevent flash corrupt of the set!!
Procedure to check SW version of your DVD Portable
1. OPEN
2. Press SETUP MENU
3. Select Preferences
4. Select Version Info
5. Press "OK" key
1-3
Advertisement
