Subscribe to Our Youtube Channel
Summary of Contents for NetComm NF10WV
- Page 1 QUICK START GUIDE NetCommWirele VDSL / ADSL N300 WiFi Modem Router with VoIP NF10WV...
- Page 2 WELCOME Thank you for choosing a NetComm Wireless VDSL / ADSL N300 WiFi Modem Router with VoIP (NF10WV). This guide will help you set up, connect and configure your device quickly and easily. PACKAGE CONTENTS This package includes: VDSL/ADSL N300 WiFi...
- Page 3 Connect the supplied RJ11 cable to the “modem” port of your DSL line filter and then connect the other end to the DSL port on the back of the NF10WV. Connect the DSL line filter (not included) to the wall socket and then connect your handset to the “phone” port of the filter.
- Page 4 CONFIGURING THE DEVICE FOR USE WITH AN INTERNET SERVICE Click on the Basic Setup menu item on the left side of the screen. ADSL Select ADSL and click the Next button. Select either the PPPoE or PPPoA for your internet connection as specified by your Internet Service Provider (ISP).
- Page 5 In the User ID and Password fields, enter the username and password assigned to you by your Internet Service Provider (ISP). Click the Finish button. The account settings are saved and the NF10WV connects to the internet. VDSL Select VDSL and click the Next button.
- Page 6 Ethernet WAN Connect an RJ45 Ethernet cable to the WAN port on the NF10WV. Connect the other end of the cable to your WAN service. Select Ethernet WAN then click the Next button. Select the WAN mode for your internet connection as specified by your Internet Service Provider (ISP).
- Page 7 SSID (network name) listed on the WiFi security card. When prompted, enter the password that is also printed on the card. 2.4GHz - 2.4GHz - VDSL / ADSL N300 WiFi Modem Router with VoIP - NF10WV...
- Page 8 CHANGING THE WIRELESS PASSWORD If you would like to change the wireless password to something easier to remember, follow these steps. Select the Wireless menu from the left side of the screen, then select the Security option below it. The Wireless Security page is displayed. In the WPA/WAPI passphrase field, enter the desired password to use for the wireless network.
Need help?
Do you have a question about the NF10WV and is the answer not in the manual?
Questions and answers