iHome iBT82 Instruction Manual page 6

Getting Started: Carry Strap
The iBT82 comes with a carry strap for easy carrying or attaching to a
backpack, shower head, etc.
To attach the carry strap, form a small loop in one end of the strap. Insert this
loop through the channel on top of the unit, then pull the loop back through
the larger loop formed in the carry strap to tighten.
Getting Started: Charging the Unit
Charge unit before use. For first time charge, charge for at least 4 hours.
Pull back waterproof seal and connect the included micro USB cable to the
USB Charging Port on the left side of the unit and connect the other standard
USB plug to a computer, USB AC adaptor (not included) or other USB power
source. The status indicator glows solid red while charging and turns off once
charged. While powered on, press the + and – Buttons at the same time to
hear battery level voice prompts.
Computer
connected to
working outlet
OR
Computer USB port
Using the
USB AC adaptor
(not included)
5
iBT82
USB AC adaptor
connected to
working outlet