Crown SST-3632 Reference Manual

Crown sst-3632 crossover module: reference guide
Hide thumbs Also See for SST-3632:

Advertisement

Quick Links

SST-Modules
SST-4622
SST-3632
SST-4632
© 2005 by Crown Audio
U.S.A. Telephone: 574-294-8000. Fax: 574-294-8329. Trademark Notice: Crown
and Crown Audio are registered trademarks of Crown International. Other trade-
marks are the property of their respective owners.
Obtaining Other Language Versions:
To obtain information in another language about the use of this product, please
contact your local Crown Distributor. If you need assistance locating your local
distributor, please contact Crown at 574-294-8200.
Note: The information provided in this manual was deemed accurate as of the
publication date. However, updates to this information may have occurred. To
obtain the latest version of this manual, please visit the Crown website at www.
crownaudio.com.
Printed on
recycled paper.
This manual describes the following models:
®
, Inc., 1718 W. Mishawaka Rd. Elkhart, IN 46517-9439
SST-SBSC 3632T
SST-SBSC 4632T
132166-5A
6/05

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SST-3632 and is the answer not in the manual?

Questions and answers

Summary of Contents for Crown SST-3632

  • Page 1 Note: The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have occurred. To obtain the latest version of this manual, please visit the Crown website at www. crownaudio.com. Printed on recycled paper.
  • Page 2: Crown Factory Service

    Crown SST modules may only be installed by Crown or an authorized Warranty Service Center. The name of a Service Center near you may be found online at www.crownaudio.com, or by contacting Crown Factory Service at: Crown Factory Service 1718 W. Mishawaka Rd., Elkhart, IN 46515 USA...
  • Page 3: Table Of Contents

    1.1 Wiring ... 4 2 SST-4622 ... 5 2.1 System Setup ... 5 2.2 Specifi cations ... 6 3 SST-3632 ... 7 3.1 System Setup ... 7 3.2 Specifi cations ... 8 4 SST-4632 ... 9 4.1 System Setup ... 9 4.2 Specifi...
  • Page 4: Welcome

    SSTs plug quickly and easily into the back of your amp. When you use a Crown SST module to split the power drive to the loud- speaker components, you gain a wide range of advantages, including: 1.
  • Page 5: Sst-4622

    Figure 2.2. Note: The amplifi er should be placed in Stereo (Dual) mode. Figure 2.1 SST-4622 Front Panel Connector Figure 2.2 Stereo confi guration using a Crown SST-compatible amplifi er and the SST-4622 module. Page 5 Reference Manual...
  • Page 6: Specifi Cations

    2.2 Specifi cations Frequency Response: See Figure 2.3. Signal to Noise Ratio: 90 dB, A weighted. Figure 2.3 SST-4622 Frequency Response Page 6 SST Modules Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced. Connectors Input: Electronically Balanced, 3-posi- tion removable terminal block.
  • Page 7: Sst-3632

    Figure 3.2. Note: The amplifi er should be placed in Stereo (Dual) mode. Figure 3.1 SST-3632 Front Panel Connector Figure 3.2 Stereo confi guration using a Crown SST-compatible amplifi er and the SST-3632 module. Page 7 Reference Manual...
  • Page 8: Specifi Cations

    3.2 Specifi cations Frequency Response: See Figure 3.3. Signal to Noise Ratio: 90 dB, A weighted. Figure 3.3 SST-3632 Frequency Response Page 8 SST Modules Input Impedance: 20 k ohms balanced, 10 k ohms unbalanced. Connectors Input: Electronically Balanced, 3-posi- tion removable terminal block.
  • Page 9: Sst-4632

    Figure 4.2. Note: The amplifi er should be placed in Stereo (Dual) mode. Figure 4.1 SST-4632 Front Panel Connector Figure 4.2 Stereo confi guration using a Crown SST-compatible amplifi er and the SST-4632 module. Page 9 Reference Manual...
  • Page 10: Reference Manual

    4.2 Specifi cations Frequency Response: See Figure 4.3. Signal to Noise Ratio: 90 dB, A weighted. Figure 4.3 SST-4632 Frequency Response Page 10 SST Modules Input Impedance: 20 k ohms bal- anced, 10 k ohms unbalanced. Connectors Input: Electronically Balanced, 3-position removable terminal block.
  • Page 11: Sst-Sbsc 3632T

    SST Modules 5 SST-SBSC 3632T The SST-SBSC 3632T is an SST- SBSC factory-confi gured to provide crossover, equalization and signal routing specifi cally for the triamped JBL ScreenArray model 3632T cinema speaker system. 5.1 System Setup Your system should be wired as shown in Figure 5.2.
  • Page 12: Specifi Cations

    5.2 Specifi cations Performance Frequency Response: See Figure 5.3. Signal to Noise (A-Weighted): Better than 85 dB below rated power. Input Impedance: 20 k ohms bal- anced, 10 k ohms unbalanced. Output Impedance: 600 ohms bal- anced. Figure 5.3 SST-SBSC 3632T Frequency Response Page 12 SST Modules Total Harmonic Distortion (THD):...
  • Page 13: Sst-Sbsc 4632T

    SST Modules 6 SST-SBSC 4632T The SST-SBSC 4632T is an SST- SBSC factory-confi gured to provide crossover, equalization and signal routing specifi cally for the triamped JBL ScreenArray model 4632T cinema speaker system. 6.1 System Setup Your system should be wired as shown in Figure 6.2.
  • Page 14: Specifi Cations

    6.2 Specifi cations Performance Frequency Response: See Figure 6.3. Signal to Noise (A-Weighted): Better than 85 dB below rated power. Input Impedance: 20 k ohms bal- anced, 10 k ohms unbalanced. Output Impedance: 600 ohms bal- anced. Figure 6.3 SST-SBSC 4632T Frequency Response Page 14 SST Modules Total Harmonic Distortion (THD):...
  • Page 15: Service

    They will handle the necessary paperwork and repair. Remember to trans- port the unit in the original factory pack. A list of authorized service centers in your area can be obtained from Crown Factory Service, or online from http://www.crownaudio.com/support/servcent.htm.
  • Page 16: Packing Instructions

    7.2.5 Estimate Approval Approval of estimate must be given within 90 days after being notified by Crown Audio Inc. Units still in the posses- sion of Crown after 90 days of the estimate will become the property of Crown Audio Inc.
  • Page 17: United States And Canada

    ORIGINAL PURCHASER and ANY SUBSEQUENT OWNER of each NEW Crown product, for a period of three (3) years from the date of purchase by the original purchaser (the “warranty period”) that the new Crown product is free of defects in materials and workmanship.
  • Page 18 Crown product regardless of the reason for failure, except as excluded in this Crown Warranty. 1 Note: If your unit bears the name “Amcron,” please substitute it for the name “Crown” in this warranty.
  • Page 19: Crown Audio Factory Service Information

    Crown Audio Factory Service Information Shipping Address: Crown Audio Factory Service, 1718 W. Mishawaka Rd., Elkhart, IN 46517 SRA #: __________________(If sending product to Crown factory service.) Serial Number: _____________________ Individual or Business Name: _____________________________________________________________________ Phone #: _____________________________________ E-Mail: _______________________________________ Street Address (please, no P.O.

This manual is also suitable for:

Sst-4622Sst-sbsc 3632tSst-4632Sst-sbsc 4632t

Table of Contents