Error Messages - Roland LX-17 Owner's Manual

Problems with Bluetooth functionality
Problem Items to check/Action
Could the Bluetooth function be turned "Off"?
If Bluetooth Audio function is "On"
This unit does not appear
If the Bluetooth Page Turn function is "On" and the
in the Bluetooth device list
Bluetooth Turn/MIDI function is set to "Page Turn"
of your mobile device
If the Bluetooth Page Turn function is "On" and the
Bluetooth Turn/MIDI function is set to "MIDI"
If this unit is visible as a device in the mobile
Can't connect to Bluetooth device's Bluetooth settings
audio
If this unit is not visible as a device
In some cases, the connection with the mobile device might become unavailable when you switch the Bluetooth Turn/MIDI function.
If this unit is not visible as a device in the mobile
Can't connect to Bluetooth
device's Bluetooth settings
page turning
If this unit is not visible as a device
In some cases when you switch the Bluetooth Turn/MIDI function, the connection with the mobile device might become unavailable.
Can't connect to Bluetooth
MIDI
Delete the device from the Bluetooth settings, turn the mobile device's Bluetooth function off and on again, and reestablish the connection.
Bluetooth MIDI is only compatible with iOS. Also, you must make the connection not from the mobile device's Bluetooth setting but from
Can't connect via MIDI
the setting within GarageBand or other app that you're using.
Can't establish pairing with
The page turning function and MIDI function are paired when you first select a device on the mobile device and establish a connection. There
the page turning function
is no need to initiate pairing from this unit.
and MIDI function
Can't use the page turning
function and MIDI function
The page turning function and MIDI function cannot be used simultaneously.
simultaneously
Can't connect a paired If the connection breaks immediately after it is established, or when you switch the page turning function and MIDI data transmit/receive
mobile device function, turning the Bluetooth device's Bluetooth switch off and then on again may allow connection to occur.
When using the page turning function, the keyboard might not be shown (might be unavailable) depending on the mobile device that you're
Keyboard no longer
using.
appears (becomes
If you want the mobile device's keyboard to be shown while you're using the page turning function, hold down this unit's [Accomp] button
unavailable) on the mobile
and press the [Left] button.
device
To hide the mobile device's keyboard, hold down the [Accomp] button and press the [Left] button.
°

Error Messages

Indication Meaning
An error occurred during writing. The external media may be corrupted.
Error 2
Insert other external media and try again. Alternatively, you can initialize the external media.
Error 10 No external media is inserted. Insert the external media and try again.
There is not sufficient free memory in the save destination.
Error 11
Either insert other external media or delete unneeded files and try again.
An error occurred during reading. The external media may be corrupted.
Error 14
Insert other external media and try again. Alternatively, you can initialize the external media.
Error 15 The file is unreadable. The data format is not compatible with the unit.
This audio format is not supported.
Error 18
Please use 44.1 kHz 16-bit linear WAV format audio files.
Error 30 Internal memory capacity of the unit is full.
The unit cannot deal with the excessive MIDI data sent from the external MIDI device.
Error 40
Reduce the amount of MIDI data sent to the unit.
Error 43
A MIDI transmission error has occurred. Check the MIDI cable and connected MIDI device.
There may be a problem with the system. Repeat the procedure from the beginning. If it is not solved after you have tried several times, contact the Roland
Error 51
service center.
The USB flash drive connector was subjected to excessive current. Make sure that there is no problem with the external media, then turn the power off, then
Error 65
on again.
A device named "(model name) Audio" appears.
A device named "(model name)" appears.
You can check this from a setting inside your app such as GarageBand.
Delete the device's registration, turn the Bluetooth Audio function "Off" and then "On"
again, and establish pairing once again.
Turn the mobile device's Bluetooth function off and then on again, and initiate pairing
from this unit to re-establish pairing.
Delete the device from the Bluetooth settings, turn the mobile device's Bluetooth
function off and on again, and reestablish the connection.
Turn the mobile device's Bluetooth function off and on again, and then reestablish the
connection.
Error Messages
Page
p. 21
–
p. 21
–
25