Medion LIFE P89626 MD 86407 User Manual

Medion LIFE P89626 MD 86407 User Manual

1.5 tb home network storage system
Table of Contents

Advertisement

1.5 TB Home Network Storage System
MEDION
LIFE
®
®
P89626 (MD 86407)
Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LIFE P89626 MD 86407 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Medion LIFE P89626 MD 86407

  • Page 1 1.5 TB Home Network Storage System MEDION LIFE ® ® P89626 (MD 86407) Manual...
  • Page 2: Warranty Details

    You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 3: Repair And Refurbished Goods Or Parts Notice

    Please telephone us on 1 300 884 987 or write to us at: MEDION Australia Pty Ltd St. Leonards, NSW 2065 Australia MEDION Help Desk 1 300 884 987 (Operating Hours : Mon-Fri 08 :30AM to 06 :00PM EST) Email: australia@medion.com After Sales Support...
  • Page 4: Table Of Contents

    Main menu ....................24 Music menu ....................27 Photo menu ..................... 29 Video menu ..................... 30 Favorite menu ..................32 File Browser menu ................... 33 Application Zone ..................34 System settings ................35 After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 5 Report Confi g ..................86 Confi guration ..................88 Restart ..................... 90 Do you need more support? ............91 Cleaning ..................92 Disposal ..................93 Technical data ................94 Licence information ............... 95 After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 6: Notes On How To Use These Instructions

    Please follow the guidelines in the operating instructions! NOTE! Additional information on using the device. WARNING! Warning: danger of electric shock! • Bullet point/information about operating steps and results  Tasks to be performed After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 7: Proper Use

    This device is intended for use in dry, indoor areas only. This device is intended for private use only and not industrial or commercial use. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 8: Safety Instructions

    Make sure that the ventilation slots are not covered to guarantee adequate ventilation. • Do not place any objects on the cables, as this could damage them. • Keep a minimum clearance of approx. 10 cm between walls and the device After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 9: Never Carry Out Repairs Yourself

    WARNING! Never try to open and/or repair the device yourself. There is a risk of electric shock! In the event of a fault, please contact the Medion Service Centre to avoid hazards. Cleaning and maintenance •...
  • Page 10: Note On Electrostatic Charge

    Do not place any objects on the cables, as this could damage them. Note on electrostatic charge If the device does not function properly due to electrostatic charge, reset it by temporarily disconnecting it from the main power. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 11: Package Contents

    Remove the protective fi lms from the device before use! DANGER! Keep all packaging, for instance, plastic wrapping, out of the reach of children. If misused, there is a risk of suffocation. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 12: General Information

    Memeo Instant Backup: Software that lets you back up fi les and applications on the NAS server. You can also use this software to recover/restore your data. You will fi nd further information in the software user manual. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 13: Components Of The Nas Server

    OTC: One Touch Copy button USB: USB port (also for using the One Touch Copy function) RESET: RESET button USB: USB port RJ45: LAN connection for network cable On/off switch DC: Power input After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 14: Setting Up

    The USB port at the front of the server can also be used for the One Touch Copy function. PLEASE NOTE! Before using the One Touch Copy function, read the corresponding notes in these operating instructions on page 20 and on page 59. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 15: Initial Operation

    Windows).  Move the mouse pointer to the DVD/CD drive.  Right-click, then click on Open.  Double click on “Autorun.exe”.  The Installation Assistant appears.  Follow the installation instructions. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 16: Starting The Nas Starter Utility

    Starting the NAS Starter Utility  After successful installation, you can start the program by using the desktop shortcut or call it up via Start/All Programs/Medion AG/NAS Starter Utility/ Medion AG NAS Starter Utility. The NAS Seeker Utility appears. Start screen of the NAS Starter Utility.
  • Page 17: Nsu - Nas Starter Utility

    After you have logged your computer onto the NAS server, an overview page of the NAS Starter Utility appears. The NAS Starter Utility fi nds all Medion NAS servers on your network and enables straightforward access to the following functions:...
  • Page 18 This entry lets you directly access the page of the administrator settings in the Web confi gurator "System settings“ on page 35 . When prompted, enter your user name and password to open the page in the Web browser. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 19: Introduction To The Nas Server

    Provide a USB printer connected to the NAS server to other users PLEASE NOTE! The administrator can also create user accounts with administrator rights. You will fi nd further information under "Users“ on page 74. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 20: First Steps

    Use Memeo Backup to do this. (Optional) If a USB printer is connected to the NAS server, add it to the list of available printers in accordance with the instructions for your operating system. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 21: Copy/Synchronize Data With The Otc Button

    If you hear two short beeps, then there is not enough disk space to complete synchronization. In this case, you need to make suffi cient disk space on the NAS server. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 22: The Reset Button

    Resetting the standard settings will also reset the administrator password! All data on the hard drive will be retained when resetting to the standard setting! Only the system settings will be reset. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 23: Using Memeo Backup

    Temporary fi les and protocol fi les as well as virtual hard disk fi les • The “Windows” folder PLEASE NOTE! For more information about Memeo Instant Backup, go to the Help menu and call up the entry “Quick Start Guide”. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 24: The Web Confi Gurator

    On delivery, the user name [admin] and the password [1234] are preset. Log in with this user fi rst and then change your password. You will prompted to do so after the log in. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 25: Main Menu

    Web confi gurator session if there is no activity for more than 15 minutes. In this case, simply log back in to the NAS server. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 26 Use the Applications menu to activate or deactivate programs installed on the NAS server. Use the system settings in order to carry out the basic settings as user and the extended settings as administrator. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 27 Return to the main menu Call up help page for the currently displayed page Click on this button to end the current session and to log off from the Web confi gurator. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 28: Music Menu

    Show fi les as thumbnails Show fi les as list Search for fi les Refresh view Folder Select music by folders/albums. Artist Select music by artist name. Select music by folders/albums, title and artists. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 29 Rewind/fast forward Pause Name of playback list Title entry in the playback list Delete entry from the playback list Total playing time Repeat title/repeat all Random playback Adjust the volume Stop playback After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 30: Photo Menu

    Show fi les as thumbnails Show fi les as list Search for fi les Refresh view Folder Select photos by folders. Date Select photos by date. Select photos by name and folder. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 31: Video Menu

    To change the fi le view or to organise the fi les, use the tool bar shown below: Menu access Start playback Show fi les as thumbnails Show fi les as list Search for fi les Refresh view After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 32 Rewind/fast forward Stop playback Switch from the Windows Media Player to the VLC Player Full screen (double-click in the screen to exit full screen mode) Adjust the volume Elapsed/total playing time After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 33: Favorite Menu

    To change the fi le view or to organise the fi les, use the tool bar shown below: Menu access Start playback Show fi les as thumbnails Show fi les as list Refresh view After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 34: File Browser Menu

    To organise your fi les and folders, use the tool bar shown below: 10 11 Menu access Create new folder Confi gure share Delete Rename Upload Download Restore Move Copy Refresh view After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 35: Application Zone

    To deactivate or stop an application, use the tool bar shown below: Menu access Activate application Deactivate application Pause application Resume application Show applications as thumbnails Show applications as list Refresh view After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 36: System Settings

    Web confi gurator that will be displayed to the user. As administrator you can also use the entry “Go to system administration page” to switch to the system settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 37: System/Administration

    System/Administration If you are logged in as administrator, you can completely manage the confi guration for the NAS server through the System/Administration menu. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 38: Status

    Click on the status to confi gure the FTP Server. System Resource Refresh Click on this button at the top right next to the entry “System Resource” to refresh the system information. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 39: Volume Status

    The overall size of the drive as well as the utilized memory and the free memory is displayed here in percent. Session Status All users currently logged in to the NAS server are listed here. Type After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 40 Here, the date and time of the last user session is displayed in the format year, month, day, hour, minute and second. IP Address This shows the IP address of the computer that is connected to the NAS server. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 41: System Setting

    Apply Click here to accept and save the settings. Reset Click here to restore the previous settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 42: Date/Time

    In the entry “Offset” enter the offset of the summertime in hours. Apply Click here to accept and save the settings. Cancel Click here to restore the previous settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 43: Storage

    The total capacity of the drive as well as the utilised and free disk space is displayed here. Click on this entry to add a new internal or external volume. Edit Click on the entry Edit to change the drive name. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 44 ASCII character set. The name must be unique (not already allocated to another drive). Apply Click here to accept and save the settings. Cancel Click here to exit the settings without saving. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 45: Network

    Specify here if the DNS server address will be acquired automatically. Static Enter a static IP address for the DNS server. Primary DNS Server Enter the primary DNS server IP address here. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 46 Wait until the log in screen appears or the NAS server has booted completely and then use the NAS Starter Utility to fi nd the NAS server in the network. Reset Here you can restore the previously saved settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 47: Pppoe

    Enter the password for the user name entered above. Password (confi rm) Repeat the password Apply Click here to accept and save the settings. Reset Click here to restore the previous settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 48: Application

    Enter a port number between 1024 and 65535 here for the start of the range. Ending Port Enter a port number between 1024 and 65535 here for the end of the port range. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 49: Media Server

    The total number of photo fi les that are jointly used on the NAS server is displayed here. The NAS server scans the shared media fi les in all areas that have been shared under Applications->Media Server->Share Publish. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 50: Share Publish

    Select this fi eld to permit media clients to access the video fi les on the NAS server. Apply Click here to accept and save the settings. Reset Click here to restore the previous settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 51: Itunes Server

    If the repeated attempt does not succeed, the NAS server ends the download attempt and the download appears in the column “Error”. To attempt the download again, use the fi eld “Add” or create a new download. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 52 Open this window to defi ne where downloaded fi les will be stored and to make the settings for BitTorrents. Task Info Additional information about the download task is shown here. Status The status of the individual download is displayed here. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 53 BitTorrents usually begin at a slower speed, because many connections are being established. The download speed then increases during the course of the download process and then decreases again towards the end. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 54 “Browse” to search for the fi le in the directories on your computer. Location of Downloaded Files Here you can specify which storage location is to be used for new downloads After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 55 Download Period Control You can defi ne a specifi c period within which fi les are to be downloaded. Enable Download Period Control Set the download duration here to ON or OFF. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 56 BitTorrent community. PLEASE NOTE! The settings for the maximum download/upload rate do not infl uence the data transfer between users that are logged in to the NAS server via the network. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 57 Here you can edit the IP address fi ltering for BitTorrent downloads. Apply Click here to accept and save the settings. Reset Click here to restore the previous settings. Cancel Click here to exit the settings without saving. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 58 The fi le size of the fi le to be downloaded is displayed here. Uploaded/Downloaded Ratio The relation between the total amount of downloaded data and uploaded data is displayed here. Complete This shows how much data has already been downloaded. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 59 Tracker This displays the tracker that the NAS server connected to for the download. A tracker is a server that is used to fi nd peers for the fi le download. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 60: Print Server

    Enter a new name here. The name must differ from the names of other printers that are logged in to the NAS server. Apply Click here to accept and save the settings. Cancel Click here to exit the settings without saving. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 61: Otc Button

    Specify a storage location on the NAS server to which the backup fi les will be saved during copying. NOTE! The NAS server does not create a new folder to save backup fi les. We therefore recommend creating a separate folder (e.g. “Backup”) for this. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 62 The NAS server does not create a new folder to save backup fi les. We therefore recommend creating a separate folder (e.g. “Backup”) for this. Apply Click here to accept and save the settings. Cancel Click here to restore the previous settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 63: Package Management

    NAS server is connected to the Internet. Retrieve List From Internet Click on this entry to obtain a list of the available applications from the Medion server. Install/Upgrade Select an application from the list and click on the fi eld “Install/Upgrade”...
  • Page 64 A short description of the application is displayed here. Management Page The storage location of the setting menu or the Web confi gurator of the application is displayed here (after the application has been installed on the NAS server). After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 65 If additional packages are required for the application, then the required packages are displayed here. Source This shows the location of the installed application. Description A short description of the application. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 66: Flickr/Youtube

    The status of the service is specifi ed here as Enabled, Disabled, Uploading or Paused. Account Information The user name and further information about the respective account is displayed in this fi eld. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 67 Path – Enter the path of the folder or click on “Browse” to search for the folder. Select a folder. If you do not specify a folder, a slash (/) will appear in the fi eld “Path”. All contents of the selected share are chosen automatically. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 68 Specify a type for your fi les here. You can choose between Photos/Videos, Screenshots/Screencasts, or Illustration/Art/Animation/CGI. Apply Click here to accept and save the settings. Reset Click here to restore the previous settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 69: Youtube

    YouTube Account Confi guration Username This displays the YouTube account to be used for the uploads. Switch User Click on this entry to specify a different user. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 70 For example, if you specify a time of 5 minutes, the fi les newly added to the monitored folders will be loaded to the corresponding account after 5 minutes. You can specify a range from 1 to 10080 minutes (1 week). After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 71: Ftp Uploadr

    Select a server from the list and choose this entry to edit the settings for this FTP server. Delete Select a server from the list and choose this entry to delete the FTP server from the list. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 72: Adding Or Editing An Ftp Server Entry

    Here you can enter a description for the FTP server. Test Connection Click on this entry to establish a connection to the FTP server in order to test the settings. Apply Click here to accept and save the settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 73: Ftp Uploadr Preferences

    Select a folder. If you do not specify a folder, a slash (/) will appear in the fi eld “Path”. All contents of the selected share are chosen automatically. Click on Accept to save the settings, or click on Cancel to exit the settings without saving. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 74 Internet access is limited. Apply Click here to accept and save the settings. Reset Click here to restore the previous settings. Close Click here to close the window without making changes. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 75: Sharing

    This displays whether the account is a user account or an administrator account. Username The user name affi liated with the account is displayed here. Go to Page Click on “Go to Page” to expand the user accounts view. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 76: Adding Or Editing An Account

    Select a group from the list of available groups and click on this fi eld to remove the user from this group. Apply Click here to accept and save the settings. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 77: Adding Or Editing User Group Membership

    Click on OK to close the window. Groups The Groups Screen In this window you can create and edit groups. Click here to add a new group in the next window. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 78 This displays the users who belong to the group. Add Selected User(s) Select a user from the list of available users and click on this entry to add the user to the group. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 79: Shares

    Predefi ned or standard shares. You cannot delete these shares (they are the Video, Music and Photo shares). • Subsequently added shares that have been created by administrators. • Automatic shares that were created when connecting an external data medium to this one. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 80 Publish this share to Media Server Choose this entry so that the folder contents of this share can be shared with media clients. The media clients can then access the media fi les without a password. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 81 “Music” share. PLEASE NOTE! If you set the access for all users to “Deny”, then no user will be able to access the share – not even the administrator. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 82 To activate the Windows offl ine synchronisation in Windows, right- click in the Windows Explorer on the entry of the share of the NAS server and select the entry “Always available offline”. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 83 Select a folder or a fi le you would like to rename. Enter the new name and click on “OK” to accept the new name. PLEASE NOTE! Be sure to retain the fi le extension when you enter a new name! After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 84 Select a page from the window to display further fi les/folders. Display Number You can choose here how many fi les/folders will be displayed on a page in the current view. Close Click on this entry to close the window. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 85 Click on Apply or Cancel to close the window. Apply Click on this entry to move/copy the folder/fi le to the specifi ed destination. Cancel Click on this entry to close the window. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 86: Maintenance

    Class The log category is displayed here. Severity This displays the importance level assigned to the log fi le by the NAS server. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 87: Report Confi G

    You can set which categories of log fi les will be sent as e-mail and how frequently they will be sent. Email Alert Enter the category of warning messages that will be sent. Select “All” so that all messages are sent. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 88 In the fi elds below, specify which protocol categories should be contained in the protocol report. Apply Click here to accept and save the settings. Cancel Click here to exit the settings without saving. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 89: Confi Guration

    A confi rmation window appears. Click on “OK” to accept the settings, or click on “Cancel” to exit the window. Reset to Default Load Default This action resets all settings to the standard values and restarts the device. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 90 Last check was on This displays when the NAS server last searched for new fi rmware. Check Now Click on this entry to immediately start the online search for new fi rmware. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 91: Restart

    NAS server and that no data is being exchanged with the NAS server. Confi rm the restart with “Yes” or click on “No” to cancel the restart. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 92: Do You Need More Support

    − Which software were you using when the error occurred? • Which steps have you already taken to solve the problem? • Please give us your customer number, if you have already received one. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 93: Cleaning

    Clean the device with a soft, lint-free cloth. Please keep the packaging material and always use this to transport the device. ATTENTION! There are no parts within the device that require maintenance or cleaning. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 94: Disposal

    At the end of its service life, the device should not be disposed of with the household rubbish! Please consult your local authority for advice on correct and eco-friendly methods of disposal. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 95: Technical Data

    This manual is protected by copyright. All rights reserved. Reproduction in mechanical, electronic and any other form without the written approval of the manufacturer is prohibited. The copyright is held by the company MEDION®. This device satisfi es the basic requirements and relevant regulations of the Ecodesign Directive 2009/125/EC (Regulation 1275/2008).
  • Page 96: Licence Information

    Dear customer, If you are interested, you can download the source text of the utilised GPL/LGPL from the following link: http://www.medion. com. Please specify the corresponding MD number or MSN number in the Download Centre. You will fi nd these numbers on the device.
  • Page 97 In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 98 Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 99 YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSI- BILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 100 Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 101 Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library‘s complete source code as After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 102 Sections 1 and 2 above on a medium custo- marily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 103 If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specifi ed materials from the same place. After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 104 It is not the purpose of this section to induce you to infringe any patents or other proper- After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 105 OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFT- WARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS After Sales Support Telephone: 1300 884 987 Internet: www.medion.com.au...
  • Page 106 MEDION Australia Pty Ltd St Leonards, NSW 2065 Australia Hotline: 1300 884 987 Opening hours: Mon - Fri 08:30AM to 06:00PM EST Internet www.medion.com.au E-mail Support australia@medion.com...

Table of Contents