Intense Level; Automatic Operation; Sensor Control; Saturation Notification - Gaggenau AW 442 720 Use And Care Manual

Intense level

For especially strong odor or vapor, use the intense
level.
Switching on
#
1 Press the button.
The fan starts on level 2.
Ž
2 Press the button.
The intensive mode is activated.
Note: The run time of the intensive mode is 6
minutes.Once this time has elapsed, the
appliance switches back to the previously
selected fan level.
Switching off
#
Press the button, or the button for another fan
level.
The intensive mode ends.

Automatic operation

Switching on
#
1 Push the button.
The fan starts in fan setting 2.
<
2 Push the button.
The optimum fan setting 1, 2, or 3 is set
automatically by a sensor.
Switching off
< #
Press the or button.
Automatic mode is switched off.
The fan switches off automatically if the air quality in
the room exceeds a certain level. The run time of the
automatic mode is 4 hours at most.

Sensor control

In automatic mode, a sensor in the extractor hood
detects the intensity of the cooking and roasting
fumes. Depending on the setting of the sensor, the fan
automatically switches to another fan level.
Default sensitivity setting: 2
Lowest sensitivity setting: 1
Highest sensitivity setting: 4
Changing the sensitivity of the sensor
If the sensor control reacts too quickly or too slowly,
change the sensitivity setting.
1 When the fan is switched off, press the
and hold it for approx. 4 seconds.
The setting is displayed.
2 Press button 1, 2, 3 or the
the sensitivity setting.
Button 1 = Sensitivity 1
Button 2 = Sensitivity 2
Button 3 = Sensitivity 3
Ž
button = Sensitivity 4
<
3 Press and hold the
4 seconds.
The change is saved.

Saturation notification

If the metal grease filters are saturated, the
flashes.
At the latest now the metal grease filter should be
cleaned.
For instructions on how to clean the metal grease
filters, please refer to the
section.
Resetting the saturation indicator
œ
Press the button.

Lighting

The lighting can be switched on and off independently
of the ventilation.
Switching on or switching off
ž
Press the button.
Setting the brightness
ž
Press and hold the button until the desired
brightness is reached.

Safety shut-off

For your protection, the appliance is equipped with a
safety shut-off. The lighting switches off after 12
hours and the fan after 4 hours if the appliance is not
operated during this time.
<
button
Ž
button to change
button for approx.
œ
button
Cleaning and maintenance
11