Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Ubiquiti EdgeSwitch 24 LITE
- Page 1 Managed Gigabit Switch with SFP Model: ES-24-Lite...
-
Page 2: Package Contents
Introduction Thank you for purchasing the Ubiquiti Networks® EdgeSwitch® Lite. This Quick Start Guide is designed to guide you through installation and also includes warranty terms. Package Contents EdgeSwitch Lite Power Cord Rack-Mount Brackets Bracket Screws (Qty. 2) (Qty. 8) -
Page 3: Installation Requirements
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti Networks. For more details, visit: www.ubnt.com/toughcable WARNING: To reduce the risk of fire or electric shock, do not expose the EdgeSwitch Lite to rain or moisture. -
Page 4: Hardware Overview
We recommend that you update the EdgeSwitch to the latest firmware. State Status Flashing White Bootup in progress. Ready for use, not connected to Ubiquiti® White Network Management System (UNMS ™ Blue Ready for use, connected to UNMS. - Page 5 RJ45: Speed/Link/Act SFP: Speed/Link/Act RJ45 LEDs State Status No Link Amber Link Established at 10/100 Mbps Speed/ Amber Link Activity at 10/100 Mbps Link/ Flashing Activity Green Link Established at 1000 Mbps (1 Gbps) Green Link Activity at 1000 Mbps (1 Gbps) Flashing SFP LEDs State...
-
Page 6: Front Panel Button
Front Panel Button Reset Button Description There are two methods to reset the EdgeSwitch Lite to factory defaults: Runtime Reset (Recommended) The EdgeSwitch Lite should be running after bootup is complete, and the System LED is white. Press and hold the Reset button. -
Page 7: Front Panel Ports
Front Panel Ports RJ45 1-24 SFP 1-2 Port Description RJ45 ports support 10/100/1000 Ethernet RJ45 1-24 connections. Hot-swappable SFP ports support 1 Gbps SFP 1-2 connections. Back Panel Console Port Console Port Description RJ45 serial console port for Command Line Interface (CLI) management. Use an RJ45-to-DB9, serial console cable, also known as a rollover cable, to connect the Console port to your computer. -
Page 8: Side Panel
Back Panel Power DC Input Power DC Input The 25VDC input can connect a redundant or stand-alone DC power source (not included) with minimum power: 25W, 25 to 16V, and 2.5 mm DC power inline connector. Note: You can use the redundant DC power source as a hot spare;... -
Page 9: Hardware Installation
Hardware Installation The EdgeSwitch Lite can be placed on a horizontal surface, mounted on a wall, or mounted in a rack. WARNING: FAILURE TO PROVIDE PROPER VENTILATION MAY CAUSE FIRE HAZARD. KEEP AT LEAST 20 MM OF CLEARANCE NEXT TO THE VENTILATION HOLES FOR ADEQUATE AIRFLOW. -
Page 10: Connecting Power
Connecting Power 1. Connect the Power Cord to the Power port of the EdgeSwitch Lite. 2. Connect the other end of the Power Cord to a power outlet. -
Page 11: Connecting Ethernet
Connecting Ethernet 1. Connect an Ethernet cable from your computer or host system to any port of the EdgeSwitch Lite. 2. Connect Ethernet cables from the Ethernet ports of your devices to the numbered ports of the EdgeSwitch Lite. - Page 12 Using SFP Ports To use an SFP port: 1. Remove the protective plug covering the SFP port. 2. Plug a compatible fiber module into the SFP port. 3. Connect the fiber optic cable to the fiber module. Then connect the other end of the cable to another fiber device. For information about compatible fiber SFP modules, visit: community.ubnt.com/edgemax...
-
Page 13: Accessing The Configuration Interface
Accessing the Configuration Interface The EdgeSwitch Lite is set to DHCP by default, so it will try to automatically obtain an IP address. If that fails, then it will use the default fallback IP address, 192.168.1.2. Proceed to the appropriate section, DHCP or Fallback IP Address: DHCP Use one of the following methods: •... - Page 14 3. The EdgeSwitch Lite Configuration Interface will appear. Customize additional settings as needed. For more information, refer to the EdgeSwitch documentation, which is available at www.ubnt.com/download/edgemax You can also manage your device using the Ubiquiti® Network Management System. UNMS lets you configure, monitor, ™...
- Page 15 4. The login screen will appear. Enter ubnt in the Username and Password fields. Click Sign In. 5. The EdgeSwitch Lite Configuration Interface will appear. Click the Settings icon.
- Page 16 Customize additional settings as needed. For more information, refer to the EdgeSwitch documentation, which is available at www.ubnt.com/download/edgemax You can also manage your device using the Ubiquiti Network Management System. UNMS lets you configure, monitor, upgrade, and back up your devices using a single application.
-
Page 17: Specifications
Specifications ES-24-Lite Dimensions 443 x 43 x 221 mm (17.44 x 1.69 x 8.70") Weight Rack-Mount Brackets 2.6 kg (5.7 lb) Included Rack-Mount Brackets 2.51 kg (5.53 lb) Excluded Total Non-Blocking 26 Gbps Line Rate Max. AC Power Consumption Power Method 100-240VAC/50-60 Hz, Universal Input DC 25W, 25 to 16V, with 2.5 mm DC Power Inline Connector... -
Page 18: Safety Notices
Safety Notices Read, follow, and keep these instructions. Heed all warnings. Only use attachments/accessories specified by the manufacturer. WARNING: Failure to provide proper ventilation may cause fire hazard. Keep at least 20 mm of clearance next to the ventilation holes for adequate airflow. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. -
Page 19: Limited Warranty
Limited Warranty www.ubnt.com/support/warranty/ The limited warranty requires the use of arbitration to resolve disputes on an individual basis, and, where applicable, specify arbitration instead of jury trials or class actions. Compliance Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. -
Page 20: Rohs/Weee Compliance Statement
CE Marking CE marking on this product represents the product is in compliance with all directives that are applicable to it. RoHS/WEEE Compliance Statement English European Directive 2012/19/EU requires that the equipment bearing this symbol on the product and/or its packaging must not be disposed of with unsorted municipal waste. - Page 21 Español La Directiva 2012/19/UE exige que los equipos que lleven este símbolo en el propio aparato y/o en su embalaje no deben eliminarse junto con otros residuos urbanos no seleccionados. El símbolo indica que el producto en cuestión debe separarse de los residuos domésticos convencionales con vistas a su eliminación.
-
Page 22: Declaration Of Conformity
Az EU-megfelelőségi nyilatkozat teljes szövege elérhető a következő internetes címen: www.ubnt.com/compliance Íslenska [Icelandic] Hér, UBIQUITI NETWORKS, því yfir að þetta ES-24-Lite tæki er í samræmi við grunnkröfur og önnur viðeigandi ákvæði tilskipana 2014/30/ESB, 2014/35/ESB. Fullur texti ESB samræmisyfirlýsing er að finna á eftirfarandi netfangi: www.ubnt.com/compliance... -
Page 23: Online Resources
2014/30/UE, 2014/35/UE. Il testo completo della dichiarazione di conformità UE è disponibile al seguente indirizzo Internet: www.ubnt.com/compliance Latviešu valoda [Latvian] Ar šo, UBIQUITI NETWORKS, deklarē, ka ES-24-Lite ierīce, ir saskaņā ar būtiskajām prasībām un citiem attiecīgiem noteikumiem Direktīvās 2014/30/ES, 2014/35/ES. Pilns ES atbilstības deklarācijas teksts ir pieejams šādā interneta vietnē: www.ubnt.com/compliance Lietuvių... - Page 24 New York, NY 10017 ©2014-2018 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks, the Ubiquiti U logo, the Ubiquiti beam logo, EdgeMAX, EdgeOS, EdgeSwitch, TOUGHCable, and UNMS are trademarks or registered trademarks of Ubiquiti Networks, Inc. in the United States and in other countries.