Download Print this page
KENT KPE216-071 Owner's Instruction Manual

KENT KPE216-071 Owner's Instruction Manual

Advertisement

Quick Links

MICA-THERMIC COLUMN HEATER 2000W
Congratulations on your purchase of a Kent
Portable Electric Appliance. Please read the
following instructions carefully before use and
retain for future reference.
BEFORE FIRST USE
• Read and follow all the instructions below
even if you feel you are familiar with the
appliance.
• Remove the packing and make sure that
the appliance is in tact. If in doubt do not
use the appliance and contact the place of
purchase.
• Do not leave packaging materials such as
bags and staples within reach of children.
• Dispose of packaging carefully and with
consideration for the environment.
• It is ideal to retain the appliance carton for
seasonal storage.
For your convenience record the date you
received the appliance on the warranty page
of these instructions, and attach your proof of
purchase. Retain this information in the event
that a warranty service is required.
NOTE: The rating of this appliance (as
marked on the rating label) is based on
specific loading tests. Normal use or the use
of other recommended attachments may draw
significantly less power.
IMPORTANT SAFETY INFORMATION
When using any electrically powered
appliance, these basic safety precautions
should always be followed.
WARNING: DO NOT COVER in order to
avoid overheating.
To reduce the risk of fire, electrical shock or
injury to persons or property:
• To avoid overheating, keep airflow grilles
clear of dust and hair build up - especially
if you have indoor pets.
3840-10/13
Model No. KPE216-071
OWNERS INSTRUCTION MANUAL
• Use only the voltage specified on the rating
label of the appliance.
• Do not cover or restrict airflow to the
inlet or outlet grilles in any manner as the
appliance may overheat and become a fire
risk.
• Do not cover grilles, block entry or exits of
airflow by placing the appliance against
any surface. Keep all objects at least 1
metre from the front, side and rear of the
appliance.
• Do not locate in areas of high foot traffic,
ensure the power cord and heater are in
view to avoid accidents.
• Do not operate in areas where gasoline,
paint or other flammable liquids are used
or stored.
• This appliance heats up when in use. To
avoid burns, do not touch the front of the
appliance or any of the grilles or vents.
• Before moving the appliance, switch off the
appliance by unplugging it from the wall
and allowing it to cool.
• Do not use the appliance to dry clothes.
• Do not insert or allow foreign objects
or metal utensils into any ventilation or
exhaust openings as this may cause an
electric shock, fire or damage to the
appliance.
• Do not use this appliance in the immediate
surroundings of a bath, a shower or a
swimming pool.
• Do not immerse in liquid or use the
appliance near water as this could create
an electrical shock hazard.
• If the appliance accidentally comes into
contact with water switch off the power
supply and do not touch the appliance.
• Do not operate any appliance with a
damaged cord or plug or after the
appliance malfunctions or has been
1

Advertisement

loading

Summary of Contents for KENT KPE216-071

  • Page 1 MICA-THERMIC COLUMN HEATER 2000W Model No. KPE216-071 OWNERS INSTRUCTION MANUAL Congratulations on your purchase of a Kent • Use only the voltage specified on the rating Portable Electric Appliance. Please read the label of the appliance. following instructions carefully before use and •...
  • Page 2 Heater Specifications adjusted. • This appliance is not intended for outdoor use. Model No.: KPE216-071 • Always operate upright, on a flat surface only. Heat Settings: 1000W / 2000W • CAUTION: This product is NOT suitable to Rating: 220-240V~, 50Hz be used on long pile carpets.
  • Page 3 or lubricants may have collected during automatically if it over-heats. manufacture. • Overheating can be caused by obstruction to the air intakes on the back of the heater or the grill on the front. 1000W Power • If this occurs please disconnect the heater Switch from the power socket and allow it to cool for 30 minutes.
  • Page 4 • Additional damage to parts or components due to consented use occurring after any of For full warranty terms & conditions please the above conditions. refer to our website: www.kent.co.nz. Kent ® is a registered trademark of Aber, Hamilton, NZ.