Advertisement
7
Place the power head on top of the splash guard
making sure that it is securely in place. (Fig. 4)
8
To start the appliance, plug the power cord into the
mains power supply. While holding the power head,
press down on the paddle located on top of the
power head in short intervals. (Fig. 5)
9
Hold the bowl while pulsing the On/Off paddle to
ensure the unit stays in place.
NOTE: DO NOT operate the appliance
continuously for more than 15 seconds at a time. Be
careful not to over process. For coarsely chopped
foods, use repeated short pulsing action until the
desired consistency is reached.
10 To stop the appliance, remove your fingers from the
on/off paddle.
11 For best results, press the on/off paddle in short
pulses.
12 Make sure that the blades have stopped completely
before removing the power head.
13 Remove the blade assembly by its shaft before you
empty the contents of the processing bowl.
14 Place the storage lid onto the top of the processing
bowl and close the flap to store. (Fig. 6)
Fig. 4
Fig. 5
Stacking & Storing
• Place the lid securely on the bowl and close the flap
to store.
• Remove the chopping blade when storing the bowls
with food inside.
•
The bowls can be stacked for storing in the
refrigerator or cabinet. (Fig. 7)
NOTE: The bowls do not lock together when
stacked for storage. Be careful when removing
stacked bowls from the refrigerator or cabinet.
•
Use a dry erase marker to write the date or
contents in the indicator area if so desired. To
remove the dry erase marker, wipe clean with a
damp cloth.
CUSTOMER CARE - AU: 1800 890 840
Fig. 6
Fig. 7
8
Advertisement
