Hard Drive - HP EliteBook 725 G4 Maintenance And Service Manual

Hard drive

Description
1-TB, 5400-rpm, 7.0-mm
500-GB, 7200-rpm, 7.0-mm
500-GB, 7200-rpm, 7.0-mm, FIPS
500-GB, 7200-rpm, 7.0-mm, SED
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unscrewing the power cord from the AC outlet, and
then unscrewing the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
To remove the hard drive:
1. Loosen the 4 captive screws (1) that secure the hard drive to the computer.
2. Slide the hard drive (2) to the right to disconnect it from the connector.
3. Remove the hard drive (3).
Bottom cover on page
Battery on page 36).
33).
Component replacement procedures
Spare part number
762990-001
703267-001
820572-001
820573-001
37