Removing The Heat-Sink Assembly; Prerequisites; Procedure - Dell Inspiron 5452 Service Manual

Removing the heat-sink
assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
WARNING: The heat sink may become hot during normal operation.
Allow sufficient time for the heat sink to cool before you touch it.
CAUTION: For maximum cooling of the processor, do not touch the
heat transfer areas on the heat sink. The oils in your skin can reduce
the heat transfer capability of the thermal grease.

Prerequisites

1 Remove the battery.
2 Remove the
3 Remove the
4 Follow the procedure from step 1 to step 3 in
5 Remove the
6 Remove the keyboard.
7 Remove the

Procedure

NOTE: The number of screws and the appearance of the heat-sink
assembly may be different on your computer depending on the
configuration ordered.
1 Disconnect the fan cable from the system board.
computer. After working inside your
base cover.
optical drive.
wireless card.
computer base.
After working inside your
"Removing the hard drive".
51