Advertisement
Quick Links
OWNER'S MANUAL
24V CARRIAGE
this manual contains important safety
maintenance information
first ride or allowing your child to ride your new electric
-
.
ride
on toy
FOR AGES 3+
MAXIMUM WEIGHT: TOTAL 130 lb (59 kg), 65 lb (29.5 kg)
PER SEAT
NOTE: Illustrations in this manual are for reference purposes only and may not reflect the exact
appearance of the actual product. Specifications are subject to change without notice.
.
keep the manual handy for future reference
DO NOT
QUESTIONS OR COMMENTS?
1-800-288-1560
,
read the manual before taking your
return this item to the store.
performance and
.
Advertisement
Summary of Contents for Dynacraft 24V CARRIAGE
- Page 1 OWNER’S MANUAL 24V CARRIAGE this manual contains important safety performance and maintenance information read the manual before taking your first ride or allowing your child to ride your new electric ride on toy keep the manual handy for future reference DO NOT return this item to the store.
- Page 2 TABLE OF CONTENTS A Introduction, Safety and Warnings B Before You Begin Assembly C Parts Diagram D Assembly E How to Use Your Vehicle F Detailed Maintenance and Repair G Troubleshooting Guide H Warranty ELECTRIC CAR SPECIFICATIONS SUITABLE AGE CAPACITY Up to 130 lb (59 kg) MAX SPEED Low 2 5 MPH / High 5 0 MPH...
- Page 3 INTRODUCTION, SAFETY AND WARNINGS ABOUT THIS MANUAL: This manual was written to help you and your child get the most performance, comfort, enjoyment and safety when riding your new electric ride-on toy. It is important for you to understand your new electric ride-on toy.
- Page 4 RIDER USE AND REQUIRED PARENTAL SUPERVISION RIDERS MUST NOT EXCEED THE WEIGHT LIMIT OF 130 POUNDS (59 KG) AND MUST BE OVER 3 YEARS OLD. NEVER MORE THAN 2 CHILDREN TO RIDE THE VEHICLE SIMULTANEOUSLY. The age grade for the electric ride-on toy is for 3 years and older. Just because your child is within the age and weight limitations specified for the electric ride- on toy, does not mean that his/her size is appropriate to fit or maintain control of the electric ride-on toy, or that he/she is capable of safely operating the electric...
- Page 5 SAFE RIDING PRACTICES AND WARNINGS • Check and obey all local laws or regulations which may be in effect in the locations where the electric ride-on toy may be used. • Always wear appropriate clothing and shoes. • Observe the age and weight limitations on the cover of this manual. •...
- Page 6 • Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with wheels or other moving parts. • Before each cycle of operation, you must perform the preoperation checks specified in this manual or by the manufacturer, including: –...
- Page 7 BEFORE YOU BEGIN ASSEMBLY WARNING: Remove all packing and items from the display box. ESTIMATED ASSEMBLY TIME You should allow approximately 50 minutes for assembly, not including initial charging time. Initial charging can take approximately 18 hours. (see page 14–16 for charging information).
- Page 8 PARTS DIAGRAM Tools Required Screwdriver (not included) Socket Wrench (included) Note: Some parts shown are assembled on both sides of vehicle. Tiara on Carriage Roof x 1 15 Driving Wheelx 2 Carriage Roof x 1 16 Front Wheel x 2 Lantern x 4 17 Ø12 Washer x 4 Roof Support (Front) x 1...
- Page 9 ASSEMBLY Your new vehicle requires adult assembly. Please set aside around 35 minutes for assembly. Please identify all parts before assembly and save all packaging material until assembly is completed to ensure that no parts are discarded. TOOLS REQUIRED: 17mm Socket Wrench Phillips Screwdriver (included) (not included)
- Page 10 2. REAR AXLE ASSEMBLY • Remove all parts from the rear axle. • Insert the rear axle through the hole in the vehicle body as shown, and ensure that the rear axle is centered with left and Gear Box Hole right ends exposed the same distance outside of the vehicle body.
- Page 11 4. SEAT BACK ASSEMBLY • Gently turn the vehicle body upright. • Slide the seat back into the slots in the plastic body as shown, push until 4x12 Round you hear a “click”, and use the Phillips Head Screw screwdriver to tighten with four 4x12 round head screws.
- Page 12 STEERING WHEEL BATTERY SAFETY INFORMATION: Batteries may leak fluids that can cause chemical burn, injury or ruin your product. To avoid battery leakage: • Install batteries correctly, observing the polarity (+,-) signs to avoid leakage. • Do not mix old and new batteries. •...
- Page 13 8. REAR ROOF SUPPORT ASSEMBLY 4x12 Round • Slide the rear roof support into slots in Head Screw back of vehicle body as shown, push until it click into, then insert three 4X12 round head screw as show and tighten them with a screwdriver.
- Page 14 12. LANTERN BATTERIES Lantern Wick INSTALLATION NOTE: Batteries are not included. • Unscrew the two 3X12 round head screws at the bottom of the lantern socket. Lantern Socket • Take out the lantern wick and insert 2X1.5V size AAA or LR03 batteries as show. 3X12 Round •...
- Page 15 15. MAGIC WAND ASSEMBLY • Insert the magic wand into the hole inside the dashboard tiara as shown, and push it all the way down. Hole 16. POWER SUPPLY CONNECTION NOTE: The battery is disconnected for shipment to prevent the battery from draining. •...
- Page 16 PREVENT FIRE • Never modify the electrical system. • Alterations could cause a fire resulting in serious injury and could also ruin the electrical system. • Use of the wrong type battery or charger could cause a fire or explosion resulting in serious injury.
- Page 17 IMPORTANT NOTE • The battery must be upright while charging. • The charger is not a toy. • Do not short-circuit the battery. • You do not need to remove the battery from your vehicle to recharge it. • Before charging the battery, examine the battery case for cracks and other damage which may cause sulfuric acid (electrolyte) to leak during the charging process.
- Page 18 HOW TO USE YOUR VEHICLE LED Switch Sound button Foot Pedal Forward/Backward Shift Lever FOOT PEDAL To move the car, press the foot pedal down. To stop, take your foot off the foot pedal. FORWARD-BACKWARD SHIFT LEVER To move the car forward at high speed, shift the lever to “High” position. To move the car forward at low speed, shift the lever to “Low”...
- Page 19 DOOR OPENING INSTRUCTION Push down the handle at front doors to open. NOTE: Only the front doors (near the dashboard side) can be opened, the rear doors have no function and unable to be opened. LANTERN USING INSTRUCTION Press the bottom button on the sockect, the lantern will light up.
- Page 20 IMPORTANT • Always stop vehicle when changing the direction to avoid damage to the gears and motor. • This vehicle has an adjustable seat belt; please instruct children on how to fasten the seat belt before using. • Do not let any child touch the wheels or be near them when the car is moving. •...
- Page 21 DETAILED MAINTENANCE AND REPAIR Disconnect power supply before conducting any maintenance procedures. Flat head Screwdriver 17mm Socket Wrench TOOLS REQUIRED: (not included) (included) HOW TO REPLACE FRONT WHEEL 1. Remove the axle cap with a flat head Wheel Axle screwdriver, by slipping along edge of cap Ø12 Axle cap Washer...
- Page 22 HOW TO REPLACE REAR WHEEL AND GEAR BOX 1. Remove the axle cap with a flat head screwdriver, by slipping along edge of cap and prying the cap open carefully. 2. Remove the M10 locknut with a 17 mm socket wrench. 3.
- Page 23 HOW TO REPLACE THE FOOT PEDAL 1. Use a flat head screwdriver to gently pry the LEFT side of foot pedal as shown. 2. Gently pull the foot pedal off. 3. Disconnect the old foot pedal from the pedal switch socket. 4.
- Page 24 HOW TO REPLACE FORWARD-BACKWARD SHIFT LEVER White Black 4X12 Round Head Screw White Black Shift Lever Bracket 1. Unscrew the four 4x12 screws on the shift lever bracket with a screwdriver and remove the Forward-Backward Shift Lever Assembly out. (Diagram A) 2.
- Page 25 BATTERY CARE AND DISPOSAL Do not store the battery in temperatures above 75° F (23.5° C) or below 32° F (0°C). THIS PRODUCT CONTAINS SEALED LEAD ACID BATTERIES WHICH MUST BE RECYCLED IN ACCORDANCE TO YOUR LOCAL AND STATE LAWS PLEASE CAREFULLY READ AND UNDERSTAND THE FOLLOWING DISPOSAL INSTRUCTIONS: DISPOSAL: This product contains sealed lead acid batteries which must be...
- Page 26 MAINTAINING YOUR VEHICLE Occasionally use a lightweight oil to lubricate moving parts such as wheels and the steering linkages. Park the vehicle indoors or cover it with a carpet to protect it from wet weather. Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
- Page 27 If your battery is old or if you have not followed Battery Care instructions, your battery may be dead. Replace only with an original 24 Volt (7 Amp/Hr.) battery. Do not use non-original substitute parts. Motor damage Visit the Dynacraft website and replace with a new motor. www.dynacraftwheels.com...
- Page 28 Replace only with an original 24 Volt (7 Amp/Hr.) battery. Do not use non-original substitute parts. Motor damage Visit the Dynacraft website and replace with a new motor. www.dynacraftwheels.com Tripped thermal fuse The thermal fuse may “trip” and shut down operation if the vehicle is overloaded or the driving conditions are too severe.
- Page 29 Problem Possible Cause Solution Vehicle runs Undercharged battery Charge the battery. A new battery should have sluggishly been charged for at least 18 hours before using the vehicle for the first time. After first-time use, recharge the battery for at least 12 hours after each use.
- Page 30 Dynacraft shall not have any responsibility for any resulting break down of the ride-on toy or its components, or for any rider injuries...
- Page 31 Dynacraft Customer Service 1-800-288-1560 7AM to 4PM Pacific Standard Time DO NOT return this item to the store. STOP Please call Dynacraft for assistance. Please have the following information available when you call: Model Number: (sample: 8802-33) Production Date: (sample: 03.03.2015)