Related Manuals for Edsyn 971-230
Summary of Contents for Edsyn 971-230
- Page 1 971-230 LONER ® Temperature Controlled Soldering Station • COMPLIES WITH MIL-S-45743E, MIL-STD-2000-1B, WS6536E AND ESD SPEC, DOD-STD-1686, DOD-HDBK-263 made U S A Instruction manual...
-
Page 2: Distinguishing Features
Specifications for Model 971-230 Power Requirements 230V, 50/60 Hz Power Rating 15W - 220W Heater Rating 230V, 95W Temperature Range 400°F-800°F/205°C-427°C Temperature Regulation ±6°F/±3°C Tip-to-Ground Voltage Leakage/Resistance < 2mV/< 2 ohms Overall Dimension 4.1"W x 8.2"H x 10"D 104 mm x 208 mm x 254 mm Weight 2.5 lbs/1.1 kg... -
Page 3: Maintenance
PD528 Static Safe Tool Temp. Regulation Indicator Power Switch SH230 Sponge Holder Hollow Threadless Heater Calibration Pots for HI & LO Temp. WARNING: DO NOT HIT OR TAP THE SOLDERING TOOL. THE HEATER ELEMENT WILL BREAK!!! MAINTENANCE • Replace RS199 Cleaning Sponge •... -
Page 4: Tip Cleaning
TIP CLEANING To maintain proper Tip to Ground resistance. Remove Tip from Heater Assembly. Using a ST707 Soldering Tool Maintenance Brush, clean Tip and Heater Barrel at surfaces shown. Install the tip and tighten RS372 Retaining Sleeve. Take note of the gap to ensure proper fitting. - Page 5 RS372- for General Purpose Tip Soldering Tip RS271- for Heavy Duty Tip SOLDERING TIPS Iron Plated for long life•Nickel and Chrome Plated for optimum heat transfer CONTACT EDSYN FOR MORE SELECTIONS .03 (0.8 mm) .48 (12.2 mm) LT374 Standard Probe .06 (1.5 mm)
- Page 6 971-230 LONER SOLDERING STATION ® SPARE PARTS LIST...
- Page 7 Pan Head Screw- Phillip #6 - 18 x 5/8 SR054 Bottom Weight POWER CORD ASSY. POWER CORD ONLY SR547 for 971-230P SR163 for 971-230P SR548 for 971-230 SR318 for 971-230 SR549 for 971-230B SR454 for 971-230B SR580 for 971-230I SR026 for 971-230I SR251...
- Page 8 NO PART OF THIS PUBLICATION INCLUDING THE INDIVIDUAL ICONS MAY BE REPRODUCED OR UTILIZED IN ANY FORM OR BY ANY MEANS WITHOUT THE PERMISSION OF EDSYN, INC. THE NAMES LONER, SOLDAPULLT, SOLDAVAC, ATMOSCOPE AUTO-VAC, IDLE-REST, PIXTER, FUMINATOR, OCTAVAC AND KLATCH ARE REGISTERED TRADEMARKS OF EDSYN, INC.
Need help?
Do you have a question about the 971-230 and is the answer not in the manual?
Questions and answers