Advertisement
IMPORTANT: Always make sure the machine is switched off and the safety button on the trigger
handle is LOCKED before connecting/disconnecting the lance, nozzle or accessories.
IMPORTANT: Lance and Nozzle must be attached to the hose for pressurised water to be produced
Using your accessories
(Jet nozzle blue nib)
The jet nozzle has a wider spray and is ideal for use on surface areas such as cars, garden furniture, decking and boats.
To attach the jet nozzle, fit the lance
onto the trigger handle by pushing
firmly and twisting clockwise to lock
into place.
(Turbo nozzle black nib)
The turbo nozzle has a more concentrated spray and is ideal for use on very dirty surfaces, patios and masonry.
As it is not fitted with a pressure regulator, it is not suitable for use on delicate or painted surfaces.
To attach the turbo nozzle, fit the
lance onto the trigger handle by
pushing firmly and twisting
clockwise to lock into place.
Hold down the release button
on the lance, push the jet nozzle
and lance firmly together until
you hear an audible CLICK.
Release the button and gently
pull the jet nozzle to make sure
it is locked securely before use.
Hold down the release button
on the lance, push the turbo
nozzle and lance firmly together
until you hear an audible CLICK.
Release the button and gently
pull the turbo nozzle to make sure
it is locked securely before use.
Using your machine
Switch the pressure washer
on and squeeze the trigger handle
to release a high pressured jet
and start cleaning.
Squeeze the trigger on the trigger
handle to release a high pressured
water jet, and start cleaning.
After connecting
pressure hose,
lance and accessories
check they are securely
fitted and locked in
place before
turning on.
Advertisement
