ENGLISH
54
Interruption of the Descaling Cycle
Once the descaling cycle has started, you must complete it till the very end
without turning off the machine.
In case you get stuck during the cycle you can exit by pressing the on/off
button.
If this occurs, empty and rinse carefully the water tank, then fi ll it up to the
CALC CLEAN level.
Follow the instructions provided in the "Manual Rinse Cycle" chapter
before brewing any beverage.
If the cycle was not completed, the machine will require another descaling
cycle to be performed at your earliest convenience.
PROGRAMMING
You can customise the machine functions via the programming menu.
The following settings can be adjusted
Coff ee Temperature
This function allows you to adjust the coff ee brewing temperature.
Timer (stand-by)
This function allows you to adjust the time taken for the machine to go
into stand-by mode after the last brewing.