Reset to Factory Settings ........11 Troubleshooting ........... 12 FCC Statement ............ 13 Remote Code Section ......... 14 Congratulations on your purchase of the ONN Universal Remote. This remote is capable of operating thousands of audio/video devices including TVs, DVD players, cable, satellite...
Battery Installation Your universal remote requires two (2) AAA Alkaline batteries (not included). To Install the Batteries: 1. Remove the battery compartment cover by sliding the cover down. 2. Match the (+) and (-) marks on the batteries to the (+) and (-) marks inside the battery compartment, then insert two (2) AAA Alkaline batteries.
Button Functions TV, CBL/SAT, Red Indicator ON•OFF Turns VCR/AUX, DVD Light when the device On Selects the device any button is or Off. to control. pressed. EXIT Exits On- Screen Menus. MUTE Turns off the TV sound while the picture remains.
Page 5
Button Functions, cont. MENU displays the ? (INFO) displays/selects Menu on the TV and on-screen channel other devices. Use information, etc. the SHIFT button to access this feature. VOLUME UP/DOWN Changes the volume level of the device, normally the TV. CHANNEL Up/Down Changes the channels.
Programming Your Remote Your ONN universal remote control is designed to control up to 4 different audio/video devices such as TV, DVD, VCR, satellite, cable and audio using only one remote. To use this remote, you will need to program it to control the devices of your choice.
Page 7
Continue this process until a code for your device is found. To view a helpful demonstration video for programming your ONN remote, see QR code on page 2 of this manual. Programming Notes • If your device does not respond to the remote...
Programming Your Remote Auto Code Search The Auto Code Search searches automatically through all of the codes stored in this remote. Read all the following steps prior to starting the auto search as you will need to be prepared to lock-in the proper code when found.
Programming Your Remote To view a helpful demonstration video for programming your ONN remote, see QR code on page 2 of this manual. Programming Notes • This process may take several minutes as the remote contains many codes. • The SETUP button can be used during the search process to reverse the direction of the search of the remote codes.
Master Volume Feature Master Volume Feature The Master Volume Feature allows you to select a single device (TV or audio receiver) that the volume control always controls. For example, the remote can be in TV mode while the volume buttons control the volume on your audio receiver instead of your TV.
Master Volume Feature, cont. 2. Press and release the device button (TV, DVD, SAT, AUX) which is programmed to control the Master Volume Feature. 3. Press and release the MUTE button. 4. Press and release the VOL - button. The red indicator light will blink twice and go off.
Troubleshooting Remote does not operate your device. • Make sure the batteries are fresh and installed correctly. • Aim the remote directly at your device, and make sure that there are no obstructions between the remote and device. • Make sure you select the appropriate device on the remote you wish to control, for example, TV for TV, DVD for DVD, etc.
FCC Statement FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the 39900 and is the answer not in the manual?
Questions and answers