Table of Contents
Advertisement
1.4 Connectors
The following connectors are situated on the left hand side of the
FPM-37T/S:
Video I/O Port (MDR-26)
This connector links the FPM-37T/S to the PCA-6654 display card.
Figure 1-1 shows how to connect the MDR-26 of the PCA-6654.
Note:
Warning:
Touchscreen Connector (DB-9) (Optional)
This connector will be present only if a touchscreen is installed. It
must be connected to the RS-232 port of the PC. The touchscreen
cable is included with all orders which include the touchscreen option.
External Keyboard Connector
The FPM-37T/S provides an external keyboard connector to let you
attach a PC/AT standard keyboard. Figure 1-1 shows the correct
wiring method. Be sure the internal keyboard connector between
PCA-6654 (EXT.KBD) and the CPU card (KBD) has been connected.
The display card provides power to the FPM-37T/S;
no external power is required.
Make sure that your display card corresponds with
your choice of display!
Chapter 1 Introduction
5
Advertisement
Table of Contents
