Download Print this page
Konwin Home GD8110AP-M Owner's Manual

Konwin Home GD8110AP-M Owner's Manual

Tabletop ptc tower heater

Advertisement

Quick Links

TABLETOP PTC TOWER HEATER
OWNER'S MANUAL
Model No. GD8110AP-M
PLEASE SAVE THESE INSTRUCTIONS
WARNING: READ THIS OWNER'S MANUAL CAREFULLY BEFORE USE.

Advertisement

loading

Summary of Contents for Konwin Home GD8110AP-M

  • Page 1 TABLETOP PTC TOWER HEATER OWNER’S MANUAL Model No. GD8110AP-M PLEASE SAVE THESE INSTRUCTIONS WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE.
  • Page 2: Important Instructions

    Thank you for choosing Konwin Home. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater.
  • Page 3: Specifications

    17. Use only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by unauthorized dealers may cause hazards.
  • Page 4: Product Diagram

    WARNING: It is normal for the power cord to feel warm to the touch; however, a loose fit between the outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug into a different outlet. Contact a qualified electrician to inspect the original outlet for damage.
  • Page 5: Maintenance

    Control Panel Oscillation button Mode switch Oscillation switch HIGH MAINTENANCE 1. Turn off the power switch in the rear of the unit. 2. Unplug the unit and let it cool completely. 3. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary.
  • Page 6: Basic Troubleshooting

    6. Wait until the unit is completely dry before use. 7. Air filter needs cleaning after used 3 months of use. Please take off the filter with the 2 steps in the drawing below. Flush and clean the filter with water, Then,dry it out and re- assemble.