LG CM4350 Simple Manual page 4

Programmed Playback
You can make a playlist of your favourite tracks/files from a disc or USB device using Programmed Playback.
,
This function is supported only on stop status.
To make Programmed Playback list
Press to enter the edit mode.
a
Select a track/file and confirm.
b
Press again to exit from the edit mode.
c
,
A playlist of up to 20 tracks/files can be entered for CD/USB1/USB2.
,
Repeat steps b to store other files.
Specification
ENGLISH
Power Requirements 120 V ~ 60 Hz
Power Consumption 50 W
Bus Power Supply
5 V 0 500 mA
(USB)
Total Output 260 W
Design and specifications are subject to change
without notice.
CM4350-FB_DUSALLK_SIM_1487_1488.indd 4
To enjoy Programmed Playback
Press again after you make the list.
a
Press to play the list.
b
Press twice to exit from Programmed
Playback mode.
To delete Programmed Playback List
Press in stop status.
a
Press repeatedly to select a track/file.
b
Press to delete selected song.
c
DELETE
Safety Information
Additional Information
Music File Requirement
Sampling frequency y MP3 : 32 - 48 kHz
y WMA : 32 - 48 kHz
Bit rate y MP3 : 32 - 320 kbps
y WMA : 40 - 192 kbps
Maximum files Data CD : 999 / USB : 2000
Maximum folders Data CD : 99 / USB : 200
File extensions y ".mp3"
y ".wma"
CD-ROM file format ISO9660+JOLIET
USB Flash Drive Devices that support USB2.0 or USB1.1.
Bluetooth
Codec SBC
This device is equipped with a portable battery or accumulator.
CAUTION
Safety way to remove the battery or the battery from the
RISK OF ELECTRIC SHOCK
equipment: Remove the old battery or battery pack, follow the
DO NOT OPEN
steps in reverse order than the assembly. To prevent contamination
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT of the environment and bring on possible threat to human
and animal health, the old battery or the battery put it in the
REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. appropriate container at designated collection points. Do not
dispose of batteries or battery together with other waste. It is
recommended that you use local, free reimbursement systems
This lightning flash with arrowhead symbol batteries and accumulators. The battery shall not be exposed to
within an equilateral triangle is intended to
excessive heat such as sunshine, fire or the like.
alert the user to the presence of uninsulated
IMPORTANT SAFETY
dangerous voltage within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
INSTRUCTIONS
The exclamation point within an equilateral 1. Read these instructions.
triangle is intended to alert the user to
2. Keep these instructions.
the presence of important operating and
maintenance (servicing) instructions in the 3. Heed all warnings.
literature accompanying the product.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
WARNING: This product contains chemicals known to the State of
California to cause cancer and birth defects or other reproductive 7. Do not block any ventilation openings. Install in accordance
harm. Wash hands after handling.
with the manufacturer's instructions.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO
8. Do not install near any heat sources such as radiators, heat
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
registers, stoves, or other apparatus (including amplifiers) that
CAUTION: The apparatus shall not be exposed to water (dripping produce heat.
or splashing) and no objects filled with liquids, such as vases, shall
9. Do not defeat the safety purpose of the polarized or grounding-
be placed on the apparatus. type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
WARNING: Do not install this equipment in a confined space such
as a book case or similar unit. grounding prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not fit into your
CAUTION: Do not use high voltage products around this product.
outlet, consult an electrician for replacement of the obsolete
(ex. Electrical swatter) This product may malfunction due to
outlet.
electrical shock.
10. Protect the power cord from being walked on or pinched par-
CAUTION: Do not block any ventilation openings. Install in
ticularly at plugs, convenience receptacles, and the point where
accordance with the manufacturer's instructions.
they exit from the apparatus.
Slots and openings in the cabinet are provided for ventilation and
11. Only use attachments/accessories specified by the manufac-
to ensure reliable operation of the product and to protect it from
turer.
over heating. The openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar surface. This product
12. Use only with the cart, stand, tripod, bracket,
shall not be placed in a built-in installation such as a bookcase or
or table specified by the manufacturer,
rack unless proper ventilation is provided or the manufacturer's
or sold with the apparatus. When a cart is
instruction has been adhered to.
used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
CAUTION: This product employs a Laser System.To ensure
required when the apparatus has been damaged in any way,
proper use of this product, please read this owner's manual such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
carefully and retain it for future reference. Shall the unit
has been exposed to rain or moisture, does not operate nor-
require maintenance, contact an authorized service center.
mally, or has been dropped.
Use of controls, adjustments or the performance of
procedures other than those specified herein may result in
hazardous radiation exposure. To prevent direct exposure
to laser beam, do not try to open the enclosure.
CAUTION concerning the Power cord
The Power Plug is the disconnecting device. In case of an
emergency, the Power Plug must remain readily accessible.
The USB function of this unit does not support all USB devices.
,
,
Using NTFS file system is not supported. (Only FAT(16/ 32) file system is supported.)
,
External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
,
The DTS is not supported. In case of DTS audio format, audio is not output.
FCC Compliance Statement FCC RF Radiation Exposure Statement : This equipment complies
with FCC radiation exposure limits set forth for an uncontrolled
This device complies with part 15 of the FCC rules.
environment. This equipment should be installed and operated
Operation is subject to the following two conditions:
with minimum distance 20 cm between the radiator and your
(1) This device may not cause harmful interference, and body. End users must follow the specific operating instructions for
satisfying RF exposure compliance. This transmitter must not be
(2) This device must accept any interference received, including
co-located or operating in conjunction with any other antenna or
interference that may cause undesired operation.
transmitter.
NOTE: This equipment has been tested and found to comply with
CAUTION: Regulations of the FCC and FAA prohibit airborne
the limits for a Class B digital device, pursuant to Part 15 of the FCC
operation of radio-frequency wireless devices because their signals
Rules. These limits are designed to provide reasonable protection
could interfere with critical aircraft instruments.
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy Responsible Party :
and, if not installed and used in accordance with the instructions, LG Electronics USA, Inc. 1000 Sylvan Avenue
may cause harmful interference to radio communications. However, Englewood Cliffs, NJ 07632
there is no guarantee that interference will not occur in a particular TEL. : +1-800-243-0000
installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
y Reorient or relocate the receiving antenna.
y Increase the separation between the equipment and
receiver.
y Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
y Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate this equipment
FCC WARNING : This equipment may generate or use radio
frequency energy. changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose the
authority to operate this equipment if an unauthorized change or
modification is made.
2015-02-26 2:27:36