Pptp - D-Link DIR-605L User Manual

Section 3 - Configuration
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username
and password. This option is typically used for DSL services.

PPTP:

Select Dynamic (most common) or Static. Select Static if your
ISP assigned you the IP address, subnet mask, gateway, and
DNS server addresses.
IP Address: Enter the IP address (Static PPTP only).
Subnet Mask: Enter the Primary and Secondary DNS Server Addresses (Static
PPTP only).
DNS: The DNS server information will be supplied by your ISP (Inter-
net Service Provider.)
Server IP:
Enter the Server IP provided by your ISP (optional).
PPTP Account:
Enter your PPTP account name.
Enter your PPTP password and then retype the password in
the next box.
Enter a maximum idle time during which the Internet connection
Maximum Idle
Time: is maintained during inactivity. To disable this feature, enable
Auto-reconnect.
MTU: Maximum Transmission Unit - You may need to change the MTU
for optimal performance.
Connect Mode:
Select either Always-on, Manual, or Connect-on demand.
D-Link DIR-605L User Manual
Internet Setup
PPTP
DIR-605L
16