Speedboost Function; Cook Time - Bosch NITP066SUC Use And Care Manual

As a conventional burner
By default, the flexible cooking zone can be used as a
single burner.
Activate this function
The cooktop must be turned on.
Select the flexible cooking zone with the symbols
1.
or . . lights up in the element display.
 ‹ ‹
Set the desired power level with the number keys.
2.
The flexible cooking zone is activated.
Changing the heat setting
Change the heat setting on the control panel.
Add another piece of cookware
Select the flexible cooking zone and touch the
Flex ON symbol. The element will detect the new piece of
cookware.
The previously set power level will be maintained.
Note: When you lift or remove cookware from an
activated element the element will automatically try to
detect the cookware. The previously set power level is
maintained.
Turning off this function
Select the cooking zone and touch the Flex OFF symbol.
As two burners
The flexible cooking zone can be used as two
independent burners.
Activating this function
Select the flexible cooking zone and touch the Flex
1.
OFF symbol. The indicator
and symbols.
Â
Select one of the flexible cooking zones.
2.
in the element display.
Set the power level with the number keys.
3.
The function is switched off by:
selecting the burner and pressing the 0 symbol. The
burner switches off.
Note: If the cooktop is switched off and on again, the
flexible cooking zone is switched to operation as a single
burner again.
Á
lights up between the
b
. lights up
‹ ‹

SpeedBoost function

The SpeedBoost function can be used to heat large
amounts of water faster than by using heat level
Limitation on use
This function is available on all elements, provided that
no other element in the same group is operating, (see
picture). If this is not the case, the
flash on the selected element display; then it will
automatically set the power level
Note: You can achieve maximum power on the flexible
cooking zone by placing just one piece of cookware in
the middle of the cooking zone as described in the
Flexible Cooking Zone chapter.
Setting SpeedBoost
Select an element.
1.
Touch Speed Boost. The function is set.
2.
Turning SpeedBoost off
Select an element on which SpeedBoost is set.
1.
Touch Speed Boost. The function is deactivated.
2.
Note: In certain circumstances, the function may be
Á
deactivated automatically to protect the internal
electronic components of the cooktop.

Cook time

You can use the timer function to set a cook time for any
element. The element will turn off automatically once the
set time has elapsed.
CAUTION
9
When using the timer, always keep an eye on the
▯
cooktop and do not allow anything to boil over or
burn. Boilovers can cause smoke and foods and
oils may catch on fire if left on high temperature
settings.
This function should not be used for long periods
▯
of time, especially at high heat settings.
Make sure the cooktop is turned off with the main
▯
power switch after each use.
.
Š
and symbols will
› Š
.
Š
13