Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Smartwatch H20SWTVIR4
- Page 2 SmartWatch® HD-TVI DVR Quick Guide ® The information in this quick guide is subject to change without notice. SmartWatch assumes no responsibility for any errors or omissions in this quick guide. Regulatory information FCC information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules.
-
Page 3: Preventive And Cautionary Tips
Dispose of used batteries according to the instructions provided by the battery manufacturer. Default User Name: admin Default Password: 12345 Full Operation Manual: To download the full operation manual for this SmartWatch HD- TVI DVR, please visit the following weblink: http://tiny.cc/swtvimanual Or scan the following QR code:... -
Page 4: Front Panels
SmartWatch® HD-TVI DVR Quick Guide 1. Front Panels Front Panel of H20SWTVIR4, H20SWTVIR8 & H20SWTVIR16 Figure 1. 1 Description of Front Panel Table 1. 1 Name Function Description Power indicator turns yellow when the power switch POWER on the real panel is turned on. - Page 5 SmartWatch® HD-TVI DVR Quick Guide Front Panel of H20SWTVIR16R Figure 1. 2 Description of Front Panel Table 1. 2 Name Function Description POWER Power on/off switch. ON/OFF IR Receiver Receiver for IR remote control. Connect to USB mouse or USB flash memory devices.
- Page 6 SmartWatch® HD-TVI DVR Quick Guide Enter letters “JKL”; Delete characters before cursor; Select a checkbox and ON/OFF switch; Start/stop record clipping in playback. Enter numeral “6”; Enter letters “MNO”; 6/MNO/PLAY In Playback mode, get direct access to playback interface. Enter numeral “7”;...
-
Page 7: Rear Panels
SmartWatch® HD-TVI DVR Quick Guide 2. Rear Panels Rear Panels of H20SWTVIR4, H20SWTVIR8 & H20SWTVIR16 Figure 1. 3 Description of Rear Panel Table 1. 3 Item Description VIDEO IN BNC interface for TVI and analog video input. Connects USB mouse or USB flash memory devices. - Page 8 SmartWatch® HD-TVI DVR Quick Guide Rear Panel of H20SWTVIR16R Figure 1. 4 Description of Rear Panel Table 1. 4 Item Description RCA connectors AUDIO IN VIDEO IN BNC interface for TVI and analog video input. AUDIO OUT RCA connectors LINE IN RCA connector for audio input.
-
Page 9: Starting Up And Shutting Down The Device
SmartWatch® HD-TVI DVR Quick Guide 3. Starting Up and Shutting Down the Device Purpose: Proper startup and shutdown procedures are crucial to extending the life of the device. Before you start: Check that the voltage of the power supply matches the device’s requirement, and the ground connection is working properly. -
Page 10: Menu Structure
SmartWatch® HD-TVI DVR Quick Guide 4. Menu Structure 5. Network Settings Default Network Values: IPv4 Address 192.168.1.250 IPv4 Subnet Mask 255.255.255.0 IPv4 Default Gateway 192.168.1.254 Server Port 8000 HTTP Port RTSP Port To view the DVR via a web browser on a local network, enter the following address in the browser address bar: http://192.168.1.250:88... -
Page 11: Configuring Rtsp
SmartWatch® HD-TVI DVR Quick Guide Figure 5.1.1 General Network Settings of H20SWTVIR4, H20SWTVIR8 & H20SWTVIR16 Figure 5.1.2 General Network Settings of H20SWTVIR16R Select the General tab. In the General Settings interface: You can configure the following settings: NIC Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server. - Page 12 The Server Port should be set to the range of 2000-65535 and it is used for remote client software access. The HTTP port is used for remote IE access. 6. Full Operation Manual: To download the full operation manual for this SmartWatch HD-TVI DVR, please visit the following weblink: Or scan the following QR code: http://tiny.cc/swtvimanual...
Need help?
Do you have a question about the H20SWTVIR4 and is the answer not in the manual?
Questions and answers