Page 1
Infrared Fireplace Heater OWNERS INSTALLATION AND OPERATING MANUAL Model: LS-IF1500-DOFP Safety Notice Please read this entire Installation and Operating Manual BEFORE installing and using your new Infrared Fireplace Heater. Failure to fully understand and follow instructions may result in property damage, bodily injury, or even death.
INTRODUCTION Thank you for choosing one of the best Infrared absorption fireplace heaters available in the market today. By using this infrared fireplace heater you can efficiently heat up to 1500 square feet! You can even turn down the main thermostat in your home and let this heater carry some of the home heating duty.
IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE USING THE HEATER WARNING ! POTENTIAL FOR ELECTRICAL HAZARD! When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1.
Page 5
15. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or re-locatable power tap (outlet/power strip). This heater has a self – protection function. If the heater does not operate normally, check cord and heater placement, then UNPLUG IT FROM THE OUTLET &...
This process is unique among heaters in that it minimizes wasteful heat collection at the ceiling height of rooms and targets it toward the living space instead. To achieve maximum efficiency of your Model LS-IF1500-DOFP Infrared fireplace heater, please consider the following recommendations: Locate your Infrared fireplace heater close to an inside wall of the room in which it will be used.
FIREPLACE OPERATION Plug your Infrared fireplace heater power cord into a 120V, 15amp or 20amp three-bladed receptacle. To Turn the Fireplace On: Press the Power button on the control panel or on the remote control. Default Set Temperature: The default set temperature every time the heater is powered on is typically 72°...
TROUBLESHOOTING If your heater unit shuts off unexpectedly: 1. Be sure the power cord is plugged into a working electrical outlet. 2. Check for any obstructions. If you find one, turn the hearting unit OFF and unplug it. Wait at least 10 minutes to allow the heating unit to cool completely before removing any obstruction.
Limited Manufacturer Warranty 3 Year Limited Warranty: LIFESMART warrants this heater against defects in materials and workmanship on functional parts, for a period of 3 years from the original date of purchase. Your sales receipt showing the date of purchase of the product is your proof of purchase. Keep it in a safe place for future reference.
Page 10
Warranty Limitations This warranty does not apply if the unit has been subject to negligence, fabrication, misuse, abuse, or repairs (unless authorized verbally, or in writing, by an Authorized LIFESMART Representative) alteration by non LIFESMART authorized personnel, inappropriate installations, or any case beyond the control of LIFESMART.
Customer Service and Support To Obtain Warranty Support or Advice, Please Complete These Two Easy Steps: Contact LIFESMART PRODUCTS Technical Support Warranty@lifesmartproducts.com E-mail 1-866-484-2066 or 1-214-614-2509 Phone : www.lifesmartproducts.com Visit us You will need to provide the unit's model number, serial number (located on the heater’s front panel, rear panel, or on the box), date of...