Air Live WN-200R Quick Setup Manual page 9

Bridge Point to Point
In the bridge point to point mode, you can connect
your wireless router with another, to combine two
access points and expand the scope of wireless
network, and all clients (wired only – AP will not
accept wireless clients in this mode) of two wireless
routers will think they're on the same physical
network. This function is very convenient when you
need to connect two networks between two
buildings.
WN-200R
Bridge Point to Muti Point
In the AP bridge point to multi point mode, you can
connect your wireless router with another, to combine
few of access points and expand the scope of
wireless network, and all clients of four wireless
routers will think they're on the same physical
network. This function is very convenient when you
need to connect few networks between buildings.
7
English
7