Assembling / Removing the pedestal
Assembly screw (4)
(silver)
Assembly screw (4)
(black)
■
Assembling the pedestal
1
■
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the cover.
3 Lift the TV from the pedestal.
4 Remove the assembly screws
6
M5 × 18
M4 × 10
A
C
D
2
(View from the top)
from the cover.
from the bracket.
Bracket
Base
Secure the base as shown below to prevent the TV
from falling over.
●
The place where the base is secured should be thick
15°
enough and made of hard material.
15°
Cover
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
3
E
B