5. Install the screws.
Step
Screw (quantity)
6
M2 × 1.7 mm, flat-head, nylon-coated (4)
7
M2 × 2.5 mm, flat-head, nylon-coated (10)
1140 Keyboard bezel assembly and the LCD unit
For access, remove these FRUs in order:
•
"1020 Base cover assembly" on page 58
•
"1030 Speaker assembly" on page 60
•
"1040 Battery" on page 61
•
"1050 Hard disk drive or solid-state drive" on page 62
•
"1060 Wireless-LAN card" on page 66
•
"1070 M.2 solid-state drive" on page 67
• "1080 Hard-disk-drive/buttons card and hard-disk-drive/buttons cable" on page 69
•
"1090 P sensor" on page 70
•
"1130 Keyboard assembly" on page 77
Removal steps of the keyboard bezel assembly and the LCD unit
1. Remove the screws
1
.
Color
Torque
Silver
0.181 Nm
(1.85 kgf-cm)
Silver
0.181 Nm
(1.85 kgf-cm)
.
Chapter 9
Removing or replacing a FRU
83