Advertisement
Note: The following is a function schematic. The actual position and arrangement may differ.
Turn power ON/OFF
External Signal Input Selection
Display main MENU and confirm MENU item selection
Select channel
Adjust volume
External AV signal input with relevant
left/right audio channels.
Connect to the composite terminal of your
DVD/VCR.
Connect the antenna/cable TV input
(75/VHF/UHF)
VGA input and audio input when in VGA
mode.
Place your TV on a flat surface that is able to bear the weight of the TV.
To avoid damage, please don't expose the TV to water or direct heat. Do
not block the ventilation on the back of the TV.
Connect the antenna cable to the antenna socket on the back of the
television.
Plug the power cable into the wall socket.
Press the power button on the TV and the indicator light will turn green.
If the TV is in standby mode (the indicator showing as red), then press
the power button on the remote control to turn the TV on.
Connect USB device to play media files or
record programs via the PVR function.
Digital signal from a HDMI video
connector.
PC analog signal input.
For use with headphones or external
speakers. TV speakers will be disabled
while in use.
7
Advertisement
