Crown Com-Tech CT-1610 Reference Manual page 5

R.S.V.P. Remote Switching Voltage Provider
2 Facilities
A. Enable Light
Green LED located on the left side
panel that indicates low voltage sup-
ply operation.
B. On/Com/Off
On, common, and off barrier block
input located on the left front panel
for connection of remote momentary
switches.
C. Slave/Aux In Port
RJ-11 connector located on the left
side panel that allows control from an
IQ System aux port. Also used for
daisy-chaining R.S.V.P. units to-
gether.
D. To Amplifier Remote
RJ-11 connectors located on the left
and right side panels for connecting
Figure 2.1 Left Panel Facilities
Figure 2.2 Rear Panel Facilities
to CT-10 series amplifiers or daisy-
chained R.S.V.P. units. (See Figures
3.2 and 3.3) Each R.S.V.P. can con-
trol 21 separate CT-10 series amplifi-
ers, or the R.S.V.P. can be
daisy-chained to other R.S.V.P. units
to provide control over an unlimited
number of amplifiers. RJ-11 connec-
tors are available from the Crown
Parts Department (219-294-8200).
E. AC Power Inlet
Standard IEC "three prong" AC con-
nector located on the back panel.
F. Fuse Access Door
Located on the back panel, this al-
lows access to the fuse in the event
that it needs to be changed. Please
refer to section 7.1 on changing the
fuse before trying to access this
area.
Page 5