Lenovo ideapad S130-11IGM/ideapad S130-14IGM/ideapad 130S-11IGM/
Figure 8. Removal steps of system board (continued)
Remove the screws 4 and system board 5.
Step
Screw (quantity)
M2X2mm, Phillips-head (1)
4
Turn over the system board. Detach the connector in the directions shown by
arrows 6 and 7. Then remove the IO board cable 8.
When installing: Make sure that the connectors are attached firmly.
ideapad 130S-14IGM
a b
Color
Black
f g
h
c
Torque
2.0±0.2 kgf.cm
83