Table of Contents
Advertisement
Playing Back Recordings
Before you begin...
• Connect Camcorder to power source.
• Insert recorded tape.
1
Speaker
A B
D
C
Tracking Control
Auto Tracking
Continuously analyzes each recording
for optimum picture quality.
Manual Tracking
Some recordings require manual
adjustment to reduce noise.
Press UP or DOWN until Playback
picture clears up.
Press M.FOCUS to return to Auto
Tracking.
20
04.L153-K Basic p20-22
Playback on EVF or LCD Monitor
1
Press LCD-OPEN and swing LCD monitor
fully open.
2
Set POWER to VCR.
• If tape has no record tab, auto playback
begins.
• EVF or LCD monitor turns on/off by the
POWER switch.
3
Playback function buttons.
A
(REWIND/SEARCH) : Rewind tape.
B
C
(FAST FORWARD/SEARCH) :
3
D
(STOP) : Stop tape.
E
VOLUME : During playback, adjust
E
Press "W" :
Volume down.
Note:
• When LCD monitor is closed, Volume may be
adjusted, however VOLUME indication will not
appear in EVF.
• Using LCD monitor reduces battery operating time.
Return LCD monitor to locked position when not in use.
2
• During playback, press MENU to adjust LCD monitor
brightness (page 17).
Special Effects
Quick Visual Search
Search Speed
• SP (Standard Play)
• SLP (Super Long Play) : 9 times normal.
During playback, press:
•
(FAST FORWARD/SEARCH) : fast forward search
•
(REWIND/SEARCH) : rewind search
Press again or press
Still Picture
Press
(PLAY/STILL) to freeze picture.
Press again for normal play.
This feature works best in SLP mode (page 11).
Note:
• During search, horizontal noise bars will appear.
Audio is muted.
• To protect video heads and tape, operating modes
will revert as follows after 5 minutes:
Still
Stand-by
• Tape auto-rewinds if played or fast forwarded to end.
20
(PLAY/STILL) : Play tape.
Fast Forward tape.
volume of speaker.
Press "T" :
Volume up.
: 3 times normal.
(PLAY/STILL) for normal play.
Stand-by
Power off (when Battery Pack is used).
03.3.4, 1:54 PM
Advertisement
Table of Contents
