Download Print this page
Polar Fire PFPX-438 Assembly Instructions And Parts Diagrams

Polar Fire PFPX-438 Assembly Instructions And Parts Diagrams

B43z08/b43z10/b52z08/b52z10

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS & PARTS DIAGRAMS
Ice Auger
B43Z08/B43Z10/B52Z08/B52Z10
MODEL#S PFPX-438,PFPX-4310,PFPM-528,PFPM-5210

Advertisement

loading
Need help?

Need help?

Do you have a question about the PFPX-438 and is the answer not in the manual?

Questions and answers

Summary of Contents for Polar Fire PFPX-438

  • Page 1 ASSEMBLY INSTRUCTIONS & PARTS DIAGRAMS Ice Auger B43Z08/B43Z10/B52Z08/B52Z10 MODEL#S PFPX-438,PFPX-4310,PFPM-528,PFPM-5210...
  • Page 2 CONGRATULATIONS… on purchasing your new Power Ice Auger.We know that you are anxious to get right to work,but before you do ,it is important that you take a few moments and familiarize yourself with your new Ice Auger and its operating instructions.We have worked to ensure that the ice auger meets high standards for usability and durability.With proper care,your ice auger will provide many years of service.Please take the time to register your new purchase as well as read this manual care- fully to learn how to correctly operate and maintain your equipment.
  • Page 3 SAFETY WARNING OWNER’S RESPONSIBILITY It is the owner’s responsibility for accurate assembly and WARNING SIGNIFIES A DANGER WHERE safe, effective use of the auger. YOU COULD BE SEROIUSLY INJURIED • Read and follow all safety instructions. OR HAVE AN ACCIDENT THAT COULD Carefully follow all assembly instructions.
  • Page 4 CAUTION CAUTION HOT GASES ARE A NORMAL BY-PRODUCT OF A TAKE GREAT CAUTION WITH MUFFLER, MUFFLER FUNCTIONING CATALYTIC CONVERTER. FOLLOW GUARD & OTHER PARTS OF ENGINE AS THEY ALL SAFETY INSTRUCTIONS TO PREVENT BURNS BECOME EXTREMELY HOT DURING OPERATION. AND FIRES THESE PARTS REMAIN EXTREMELY HOT EVEN AFTER ENGINE HAS STOPPED.
  • Page 5 OPERATION CAUTION STEPS FOR WORKING ON ENGINE OR AUGER Turn off engine switch. NEVER ALTER/MODIFY ENGINE OR AUGER ● IN NO WAY ALTER OR MODIFY THE ENGINE FROM HOW Disconnect the spark plug wire from the spark plug. ● IT CAME FROM THE FACTORY. SERIOUS INJURY OR Securely place the disconnected spark plug wire away from the DEATH MAY OCCUR IF IT IS ALTERED IN ANY WAY.
  • Page 6 CAUTION Filling Gas Tank ● Shut-off engine and allow engine to completely cool before refill- ing the gas tank. ALWAYS HANDLE FUEL IN A WELL VENTILATED Move to a well ventilated area, outdoors, away from flames and ● AREA, OUTDOORS, AWAY FROM FLAMES OR sparks.
  • Page 7 CAUTION WARNING MAKE SURE THE UNIT IS IN A STABLE POSITION ALWAYS HANDLE FUEL IN A WELL VENTILATED AREA, BEFORE PULLING STARTER. OUT DOORS, AWAY FROM FLAMES OR SPARKS. ALWAYS WEAR A PROTECTIVE HEARING DEVICE. WHEN THE UNIT STARTS TO FIRE OR RUN, RELEASE DO NOT START ENGINE IF FUEL IS SPILLED.
  • Page 8 HOT ENGINE START: CAUTION 1. Continue with Step 6 of Cold Engine Starting. If engine does not fire, refer to Step 1 of Warm Engine Starting. TO PREVENT ACCIDENTAL STARTING: AVOID INJURY! ENGINE MUST BE TURNED OFF DO NOT ATTEMPT TO START ENGINE IN THE FOLLOWING WAYS: AND COOL, AND SPARK PLUG WIRE MUST BE RE- MOVED FROM SPARK PLUG BEFORE CHECKING •...
  • Page 9 STEPS FOR CLEANING BLOCK STYLE FOAM AIR FILTER NOTE: SEE PARTS EXPLOSION ON PAGE 16 Before removing the air filter cover, move the choke lever to the choke position. (Figure 1) To remove air filter cover, loosen and remove the bolt on the cover and squeeze the latch tabs on both sides of the cover.
  • Page 10 LONG TERM STORAGE CAUTION • If your ice auger will not be ran for more than one month, pre- pare it for long term storage. AVOID INJURY! TO AVOID INJURY OR DEATH, NEV- Steps for Long Term Storage ER SIPHON FUEL BY MOUTH. 1.
  • Page 11 CAUTION IMPORTANT PRACTICE SAFETY AT ALL TIMES. BEFORE WHEN CALLING SERVICE, WITH ATTEMPTING MAINTENANCE QUESTIONS REGARDING YOUR AUGER OR REPAIR, SPARK PLUG WIRE MUST BE FOR PARTS, PLEASE HAVE THE FOLLOWING INFORMATION AVAILABLE WITH YOUR DISCONNECTED AND ENGINE MUST BE REQUEST: TURNED OFF AND ALLOWED TO COOL.
  • Page 12 POSSIBLE CAUSE REMEDY/ACTION PROBLEM Power switch off Flip switch to ON position Spark plug wire disconnected Connect spark plug wire to spark plug Out of fuel Refuel Spark plug wet, faulty or improperly Engine will not start Clean, replace or gap spark plug gapped Squeeze throttle control when Throttle control not held open...
  • Page 14 PART DESCRIPTION QTY. PART NO. DESCRIPTION QTY. Y430001 FLYWHEEL, MAGNETO GAS TANK Y430037 NUT, FLANGE M8 GAS CAP, MANUAL VENTING Y430002 Y430038 Y430039 Y430003 WASHER, ROTOR SHROUD, GAS TANK CLUTCH ROTOR ASSEMBLY Y430040 ENGINE WIRE Y430004 Y430041 Y430005 SPRING, CLUTCH GROMMET, 2-HOLE GAS TANK Y430042 Y430006...
  • Page 16 POWERHEAD & AUGER PARTS LIST PART PART DESCRIPTION QTY. DESCRIPTION QTY. B43.01 BOLT 3/8-16 X 1-1/4 SHCS GAS ENGINE, 43CC/52CC ICE BLADES 8” COMPLETE B43.03A HANDLEBAR BD08 SET OF 2 BLADES Y43.05 TRANSMISSION COMPLETE BD09 ICE BLADES 9” TRIGGER ASSEMBLY, LONG Y43.03 COMPLETE SET, SET OF 2 THROW...

This manual is also suitable for:

Pfpx-4310Pfpm-528Pfpm-5210