Page 1
User’s Guide Color Dome CCTV Camera CM-P11103BK 1201-1205 ,Sangda Mansion, High Technology Park, ShenZhen, Guangdong, China Tel: 0755-3363-1636 Fax: 0755-3363-1639...
Never attempt to modify CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO this product in any way. (ZMODO is not liable for NOT REMOVE REAR COVER. NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
Signal: NTSC Screws Package Box Iris: Auto Night Vision Min. Light: 0 Lux (IR On) 1) CM-P11103BK Color IR Security Camera IR Irradiation Distance: 50' (15m) Operation Temperature: 0F ~ 110F 1) A Card Mount: Ceiling or Wall 3) Screws...
SCHEMATIC DIAGRAM Dome Cover Main Body Lens Tilt Fixing Screw LEDs Locker 1201-1205 ,Sangda Mansion, High Technology Park, ShenZhen, Guangdong, China Tel: 0755-3363-1636 Fax: 0755-3363-1639...
CONNECTING CABLES RCA Cable Video Balun Monitor BNC Cable To connect cables 1. Connect the BNC cable to the video connector attached on your camera 2. Connect the BNC cable to the Video Input on a monitor, DVR or Video Balun. 3.
HOW TO INSTALL Before installation Please read the following instructions before installing your camera: You have to check whether the location (ceiling or wall) can bear five times the weight of your camera. Do not allow the cable to be caught in a pinched area, otherwise the electric line cover may be damaged.
Page 7
HOW TO INSTALL step Attach the Main Body to the mounting location using the 3 screws supplied in your package. As shown in the picture, push the two screws into the two holes on the bottom of the Main Body, then rotate the Main Body until it clicks into place.
CAMERA SPECIFICATION Specifications for NTSC & PAL Standard Item Details Product type CCTV Color CCD IR Dome Camera Power input DC 12V NTSC Standard color system PAL Standard color system Broadcast type (525 Lines, 60 Fields) (625 Lines, 50 Fields) Power Consumption Approx.
SKU: CM-P11103BK communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be...