Advertisement
Thank you and congratulations on the purchase of your new compressor.
This unit is built to the highest quality standards which produces excel-
lent efficiency. If you use it properly and maintain it accordingly to this
manual, it will perform to your fullest satisfaction for many years to
come. Please read this manual carefully and follow the instructions, it
will guarantee you trouble free operation.
A. Installation
1.
After taking your compressor out of its packaging, please check it
carefully for any damages due to shipping.
2.
Install the compressor on a flat surface in a suitably sized, dry room
with good ventilation, where the temperature is not likely to rise
above 94 degrees Fahrenheit (35 centigrade).
B. Safety
1.
Do not use the oil less compressor for purposes other than those for
which it has been designed.
2.
Do not modify or repair the compressor while it is connected to the
electric current.
3.
Note: the electric outlet has to be properly installed and grounded!
This bolt of lightning indicates un insulated ma-
terial within your unit may cause an electrical
shock. For the safety of everyone please do not
remove product covering.
The exclamation point calls attention to features
for which you should read the enclosed literature
closely to prevent operating and maintenance
problems.
Warning: to prevent fire or shock hazard, do not expose this equipment to rain or moisture.
C. Operating instructions
1.
Connect the equipment for your application to the outgoing fitting at
the front of the compressor.
2.
When the compressor gets hot from constantly running it automati-
cally shuts off. After waiting about 20 minuets to cool down, it will
start working again
Advertisement
