Usim Card Installation - SoftBank 302SH User Manual

Name
Infrared
Transfer files using Infrared.
Port
External
Shoot photos or videos.
Camera
Mobile
Use as a camera flash, flashlight, etc.
Light
External
Connect AC Charger or Micro USB Cable
Device Port
here.
(Side)
Mic Captures ambient sounds while recording
videos.
(Recorder Mic)
Place over reader/writer to use NFC/
FeliCa Logo
Osaifu-Keitai
Listen to music, video sounds, Full Seg/
Speaker
One Seg audio, etc. through this.
Handset Keys
Name
Activate/cancel Screen lock. Long Press
for power on/off or phone options.
(Power Key)
Decrease Volume. In Welcome sheet (lock
screen) or 3-Line Home, Touch & Hold to
(Volume Down
activate/cancel Silent mode.
Key)
Increase Volume. In Welcome sheet (lock
screen), Touch & Hold to turn on Mobile
(Volume Up
Light .
Key) 1
1 To turn off, Press .
Description
.
®
Description

USIM Card Installation

USIM Card is an IC card containing customer and
authentication information, including handset number.
Inserting USIM Card
Always power off beforehand.
If SD Card is inserted, remove it first. (SD Card needs to be
removed to insert USIM Card.)
・For SD Card removal procedure, see
Open Card Slot Cover
Pull out USIM Tray
・Do not pull USIM Tray forcefully or at an angle; damage may
result. Gently pull it straight out from the edge.
Place USIM Card in USIM Tray
・Check orientation of USIM Card (see the notch), then gently
place it with metal contacts facing up.
Insert USIM Tray into USIM Card Slot (bottom opening)
・Check orientation of USIM Tray, then insert it all the way.
Close Card Slot Cover
・Close Card Slot Cover firmly. Debris trapped between gasket
and base may allow ingress of liquid.
7
"Removing SD Card."