Table of Contents
Advertisement
1.
Switch off the Network Camera by disconnecting the power adapter.
2.
Remove the rear cap of the camera.
3.
Press and hold the Reset button with a straightened paperclip while reconnecting the power.
3.
Keep the Reset button pressed during about 2 seconds.
4.
Release the Reset button.
5.
The network
camera
reset.
6.
Close the rear cap of the camera.
CAUTION: When performing a Factory Reset, you will lose any settings you have saved.
3.7 More Information
For more information, please see the Network Camera User's Manual, which is available on the CD
included in this package.
resets to factory defaults and restarts after completing the factory
13
Quick Installation Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the Motorized Full-HD IR Bullet Network Camera and is the answer not in the manual?
Questions and answers