Related Manuals for Nexcom NCr-304-VHR
Summary of Contents for Nexcom NCr-304-VHR
- Page 1 NEXCOM International Co., Ltd. Intelligent Digital Security ANPR/LPR Camera NCr-304-VHR User Manual NEXCOM International Co., Ltd. www.nexcom.com Published October 2015...
-
Page 2: Table Of Contents
Recommended Installation Guideline ............8 Network ....................27 TCP/IP ....................27 Chapter 2: Camera Configuration IP Address Configuration ..............27 Accessing the Camera’s Configuration Menu (Graphical User Interface) ..9 Current Network Settings ...............27 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... - Page 3 Auto Exposure Weights ..............50 Recording Settings ................38 Network ....................51 AVI File Setting ................38 User Management ................39 DDNS ....................51 Add/Modify User Accounts .............39 DDNS Settings ................51 User List ..................39 SNMP ....................52 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
- Page 4 When Motion Detection Triggered ..........57 When Tampering Detection Triggered ..........57 System ....................58 Schedule Recording ................58 Schedule Recording Setting ............58 Chapter 3: Viewing Live Video via VLC Media Player.....59 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
-
Page 5: Preface
No describes how to keep the system CE compliant. part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written consent from NEXCOM Declaration of Conformity International Co., Ltd. -
Page 6: Rohs Compliance
(Cr6+) < 0.1% or 1,000ppm, Polybrominated biphenyls (PBB) < 0.1% or 1,000ppm, and Polybrominated diphenyl Ethers (PBDE) < 0.1% or 1,000ppm. In order to meet the RoHS compliant directives, NEXCOM has established an engineering and manufacturing task force to implement the introduction of green products. -
Page 7: Safety Information
There is a danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 8: Safety Precautions
10. Never pour any liquid into an opening. This may cause fire or electrical shock. 11. Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. viii Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 9: Technical Support And Assistance
Preface Technical Support and Assistance Conventions Used in this Manual 1. For the most updated information of NEXCOM products, visit NEXCOM’s Warning: website at www.nexcom.com. Information about certain situations, which if not observed, can cause personal injury. This will prevent injury to yourself 2. -
Page 10: Package Contents
The 3MP ANPR/LPR Camera package contains the following accessories: Placement sticker Dehumidifier packet Quick guide Mounting accessory kit 2-axis cable concealed wall Sunshield Waterproof connector Wall mount base CD (User Manual) mount bracket Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 11: Chapter 1: Product Introduction
▪ Outdoor-ready, IP66/IP67 ▪ Active tampering alarm ▪ Impact-resistant for IK10 ▪ Excellent low light noise reduction ▪ ONVIF support ▪ Extreme weather support (-40°C to 60°C) Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 12: Hardware Specifications
– 720 x 576 @ 60 fps – 720 x 480 @ 60 fps – 640 x 480 @ 60 fps – 320 x 240 @ 60 fps Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... - Page 13 ▪ Operating Temp.: -40°C~60°C ▪ Humidity: 90% RH (no condensation) ▪ Certification: CE/FCC ▪ Vandal resistant: IK10 ▪ Outdoor capable: IP66/IP67, built-in heater ▪ Application: SDK available for application development Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
-
Page 14: Di/O & Function Description
If pressed for over 5 seconds, the camera will be re-started and all the settings will be reverted to default including IP address. Strain relief Reset: Press to reset the camera. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 15: Cable Wiring Description
Ethernet cable and plug it into the corresponding port on the MB module. 5. Close the camera’s top cover and secure it with the supplied hardware tool to complete. RJ45 PHONE JACK Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 16: Cable Outlet Description
Close the camera’s cover and ensure the clip is locked in position. 5. * Ø 6.9~4.7mm (Right) Install the sunshield and tighten a torx screw on the side of cover. Line-out Ethernet Line-in DC12V/AC24V DI/O Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... - Page 17 5. Press and hold down the latch on the wall mount bracket and put it into the connecting bracket. Once in place, secure the other side using the supplied hex wrench. Press Press Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
-
Page 18: Recommended Installation Guideline
The maximum mounting angle of an ANPR/LPR camera to a vehicle is 40 degrees for both horizontal and vertical views. ≤ 40° Horizontal angle Vertical angle ≤ 40° Figure 1. Recommended Vertical and Horizontal Mounting Angles Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 19: Chapter 2: Camera Configuration
You can access the camera via a web browser or IP-FINDER software included 3. Click the Next button on the welcome screen to continue. with the camera. The following information outlines the instructions for each method. Next button Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... - Page 20 5. To check the available drives you can install the software to and their available and required disk space, please click on the Disk Cost button. User accounts 7. Click on the Next button to continue. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
- Page 21 8. Click on the Next button to begin installation. 9. Once the installation process is complete, click on the Close button to finish. A shortcut will be created on the desktop. Next button Close button Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
-
Page 22: Ip-Finder
Camera List You can also manually search cameras by clicking on the Search button. Search IP Address Note: Manual search will last for up to 90 seconds. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... - Page 23 To deselect, press the Clear All button to remove all the selection, or specific ones by unchecking the checkbox. Home Page Camera List Clear All Select All Checkbox Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
-
Page 24: Web Browser (Internet Explorer)
Focus button. To set the focus manually, press the to focus far objects, to focus near objects. Focus Zone Enables or disables display of focus zone in the center of the live view (cross-hair). Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 25: Configuring The Camera's Setting
Chapter 2: Camera Configuration Configuring the Camera’s Setting 1. To configure the camera’s setting, click on the Setup button on the main screen to enter the configuration menu. Setup Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 26: Browsing Through The Configuration Menu
– Audio Settings – Recording Settings – User Management – SD Card Management – Date & Time – Firmware Upgrade – Maintenance ▪ LPR Mode Settings ▪ Advanced Settings Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 27: Lpr Mode Settings
Check this option to enhance the contrast of the numbers on license plates. Enter the value in the threshold textbox or adjust it from 1 to 255 using the scrollbar. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 28: Video
GOP Length Configures the GOP length of the stream. The options are 0.5, 1, 2, 3 and 4, setting “0.5 seconds” will yield the best video quality. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 29: Stream 2
GOP Length Configures the GOP length of the stream. The options are 0.5, 1, 2, 3 and 4, setting “0.5 seconds” will yield the best video quality. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 30: Camera Settings
Press the < button to decrease the value, or > button to increase the value. The default value is 128. Default Default button to discard all the settings applied to Image Adjustments. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 31: Mirror & Flip
Selects the WDR constrast level to use outside of the scheduled time. Mirror & Flip Enable Mirror Flip the camera image horizontally. Enable Flip Flip the camera image vertically. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 32: Camera Settings Cont
Adjusts the exposure value on the camera, the range is 0 ~ 255. Press the < button to decrease the value, or > button to increase the value. The default value is 128. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 33: Day & Night
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 34: Overlay Settings
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 35: Privacy Mask
This section configures which area of the live video in Viewer will be masked for privacy. A total of 3 privacy masks can be configured. Selects the color of the privacy mask. The available colors are Black and White. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 36: Mask Zones
Enable mask zone 3 options, then repeat steps 2 to 3 outlined earlier. To delete a mask, check the zone number you like to remove, and press the Remove button. Rectangular square Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 37: Network
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 38: Ftp
FTP Server Host Name or IP Address Reset Reset button to discard all the settings applied. Specify the host name or IP address of the FTP server. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 39: Smtp
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 40: Ports
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 41: Ipfilter
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 42: Events
1 to 100, with 1 being the least sensitive. For more information on event, please refer to Event Actions on page 35. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 43: Detection Zones
To remove motion detection from an area, click the box to deselect it, then press the Save button for the changes to take effect. Highlighted Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 44: Alarm In/Out Trigger
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 45: Event Actions
AVI and JPEG. For information on configuring the FTP server, please refer to FTP on page 28. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... - Page 46 Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
-
Page 47: System
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 48: Recording Settings
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 49: User Management
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 50: Sd Card Management
Enables or disables overwrite protection for the SD card. Press the Save button to apply the setting. File List Displays the information of the folders and files stored in the SD card. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 51: Date & Time
Daylight Saving Select this option to enable daylight saving. The Start/End date and time for daylight saving can be manually configured in the text boxes beneath the option. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 52: Date & Time Format
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 53: Firmware Upgrade
The firmware update process will take around 15 minutes to complete, during this time, do not disconnect the network CAUTION! CAUTION! CAUTION! cable, reset or power off the IP camera, as you may damage the device. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 54: Maintenance
Save button to apply the configurations, click on this button once all the settings are confirmed for the new changes to take effect. Reset Reset button to discard all the settings applied. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 55: Advanced Settings
– Face Detection (Not available when LPR mode is enabled) – Tampering Detection (Not available when LPR mode is enabled) – Event Actions ▪ System – Schedule Recording ▪ LPR Mode Settings ▪ Basic Settings Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 56: Video
Manual Exposure Time 1:1 and 2:1 Adjusts the camera’s exposure manually, the range is 1:1/7 ~ 1:1/20000 and 2:1/7 ~ 2:1/20000, with 1/20000 being the shortest exposure length. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 57: Camera Settings (Advanced) Cont
Day Mode Enables day mode and turns the IR cut filter control off. Night Mode Enables night mode and turns the IR cut filter control on. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 58: Ir Led Control
Selects the IR LED control mode to use during the scheduled time. Use Mode (Outside of the Scheduled Hours) Selects the IR LED control mode to use outside of the scheduled time. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 59: Roi
3. Repeat the above steps to create ROI for zones 2 to 5. To delete an area, check the ROI zone number you like to remove, and press the Remove button. ROI zone 1 ROI zone 2 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 60: Auto Exposure Weights
To allow the camera to adjust the exposure automatically, select the Auto option. Background Others Configures the weighting value of the area outside of the selected zones. Zone 1 Zone 2 Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 61: Network
Displays the IP address assigned when the connection is established. Manual Used to manually specify an IP address of a DDNS server. Status Displays the connection status of the DDNS service. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 62: Snmp
Used to configure the trap community string. SNMP v3 Enable SNMP v3 Enables or disables SNMPv3 support. User name Used to configure the SNMPv3 username. User password Used to configure the SNMPv3 password. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 63: Multicast
Configures the port numbers for RTP audio and RTCP, the range is 1025 ~ 65535. Configures the time-to-live threshold of the multicast datagram before it is discarded by the router. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 64: Events
This page is used to configure link failure detection for Ethernet. Alarm Output Enables the camera to trigger the device connected to alarm output upon detecting failure of the Ethernet connection. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 65: Face Detection
Detect faces on the bottom (-90 degrees from the front). Detection Box Detection Zone Configures which detection zones are used for face recognition, the options are Rectangle, ROI and Rectangle + ROI. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 66: Tampering Detection
Event Actions menu upon detecting image blurs. Sensitivity Configures the sensitivity of the tamper detection, the range is 1~100, with 1 being the least sensitive. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 67: Event Actions (Advanced)
Check this option to activate the device connected to alarm output when desired file format in the drop down menu, the options are AVI and JPEG. tampering detection is triggered. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 68: System
Select this to set full-day recording. Select this to cancel full-day recording. Displays the end time of the recording, clicking E will allow you to configure the start time and end time. Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual... -
Page 69: Viewing Live Video Via Vlc Media Player
5. You will be prompted with a pop-up window asking for login information, type in “admin” (default login name) and “9999” (default 4. Press the Play button to start streaming. password) Open Network Stream Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. NCr-304-VHR User Manual...
Need help?
Do you have a question about the NCr-304-VHR and is the answer not in the manual?
Questions and answers