Assembling the pedestal
Use the four assembly screws
TH-P58V10M, TH-P58V10P, TH-P58V10R
●
Make sure that the screws are securely tightened.
●
Forcing the assembly screws the wrong way will strip
the threads.
●
"L" or "R" mark is stamped on the bottom of the pole.
Pole
R
Securing the TV
Use the assembly screws
●
Make sure that the screws are securely tightened.
●
Carry out the work on a horizontal and level surface.
Identifying Controls
SD card slot
HDMI4 terminal
PC terminal
S VIDEO
AV4 IN terminals
Headphone jack
Mains power On / Off
switch
●
Switch On to turn on the TV
to fasten the left and right poles to the base securely.
A
Pole
L
Front
D
to fasten securely.
C.A.T.S. (Contrast Automatic
Tracking System) sensor
●
Senses brightness to adjust
picture quality in "Eco Mode" in
Picture Menu (p. 24)
TH-P65V10D, TH-P65V10M, TH-P65V10P,
TH-P65V10R, TH-P65V10S, TH-P65V10T
●
Make sure that the screws are securely tightened
using Allen wrench
●
Forcing the assembly screws the wrong way will strip
the threads.
Pole
B
Arrow
mark
Pole
TV
Function Select
●
Volume / Contrast / Brightness /
Colour / Sharpness / Tint (NTSC mode)
/ Bass / Treble / Balance / Auto Tuning
(p. 24 - 25)
Change the channel up/down. When
a function is displayed, press up/down
to adjust the setting of the selected
function. When in standby mode,
switches TV on.
Change the input mode
Power LED
●
Standby: red
On: green
●
When using the remote control, indicates the TV has received a
command.
Remote control signal receiver
●
Do not place any objects between the TV remote control
signal receiver and remote control.
E
A
E
Pole
Front
D
view from bottom
Hole for pedestal
installation
Pole
D
9