Advertisement
PROBLEM
CHECK POINT
Does the Gear Housing Shaft
Agitator
rotate proply when the Agitator
does not
has been disassembled?
rotate
smoothly.
Is the wiring of Wash condenser
properly connected?
Agitator only
rotates in one
direction.
Is the wiring of Wash Timer prop-
erly connected?
Are there strange noise frome Tub
when the Agitator rotate?
There is
excessive
noise during
Washing
C o n c e rning Spin
PROBLEM
CHECK POINT
Is the Door Spin *O open?
The Spin
Is the Fuse blown?
Dryer does
not spin.
Is there a whirring sound from the
Spin Motor when turned ON?
NO
YES
NO
NO
YES
NO
YES
YES
NO
YES
NO
YES
NO
YES
CAUSE
Worn out the Serration
within the Agitator.
Defective Gear Housing
Improper Connection
Impropely Wiring
Defective Wash timer
Impurites between Agitator
and tub
NO
Agitator improperly
assembled.
Something is in contact with
the Agitator Pulley or Motor
Pulley or other rotating parts.
CAUSE
The contact Door Switch is
open.
SOLUTION
Replace Agitator
Replace Gear Housing.
Reconnect
Reconnect the Wash Timer.
Replace Wash Timer.
Remove impurities after dis-
assembling Agitator.
Tighten the Agitator fixing
screw.
Adjust the parts so that
there are no impurities in
contact with rotating parts
SOLUTION
Keep the Door Spin *O
closed during spin.
Change the Fuse.
EXPLANATION
12
Hide quick links:
Advertisement
