Wireless Lan/Bluetooth/Umts/Lte Radio Components; Switching The Wireless Components On And Off; Setting Up Wlan Access - Fujitsu LIFEBOOK E546 Operating Manual

Wireless LAN/Bluetooth/UMTS/LTE radio components

The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.

Switching the wireless components on and off

► Press the
The radio component indicator will be illuminated when one or more
radio components is switched on.
If you switch off the radio components, the wireless LAN antenna and the
Bluetooth and UMTS/LTE module will also be switched off.
You can enable and disable the installed radio components individually
using the WirelessSelector programme
Pay attention to the additional safety notes for devices with radio components
provided in the "Safety/Regulations" manual.
Details on using Wireless LAN can be found in the online help system
included in the Wireless LAN software.
You can find more information on how to use Bluetooth on the CD you
received with your Bluetooth software.
You can obtain more information on UMTS / LTE from your service provider.

Setting up WLAN access

• Requirement: A WLAN must be available and you must have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Fujitsu
button to start the WirelessSelector.
Working with the notebook
45