Power On/Off; Turning On The Power; Turning Off The Power - Dukane 8924HW-rj User Manual

Lcd data video projector
Table of Contents

Advertisement

Power on/off

Turning on the power

1.
Make sure that the power cord is firmly and
correctly connected to the projector and the
outlet.
2.
Make sure that the POWER indicator is
steady orange (93). Then remove the lens
cover.
3.
Press STANDBY/ON button on the
projector or the remote control.
The projection lamp will light up and POWER
indicator will begin blinking in green. When the
power is completely on, the indicator will stop blinking and light in steady
green (93).
To display the picture, select an input signal according to the section "Selecting an
input signal" (18).

Turning off the power

1.
Press the STANDBY/ON button on the projector or the remote control.
The message "Power off?" will appear on the screen for about 5 seconds.
2.
Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in
orange. Then POWER indicator will stop blinking and light in steady orange
when the lamp cooling is complete (93).
3.
Attach the lens cover, after the POWER indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off.
Also, do not turn the projector off shortly after turning it on. Such operations might
cause the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
Do not look into the lens of the projector or look inside of the projector through
any of the projector's openings.
►Do not touch around the lamp cover and the exhaust vents during use or just
after use, since it is too hot.
NOTE
• Turn the power on/off in right order. Please power on the projector
prior to the connected devices.
• This projector has the function that can make the projector automatically turn on/
off. Please refer to the DIRECT POWER ON (50) and AUTO POWER OFF (51)
items of the OPTION menu.
• Use the shutdown switch (94) only when the projector is not turned off by
normal procedure.
►A strong light is emitted when the projector's power is on.
Power on/off
STANDBY/ON button
POWER indicator
MY SOURCE/
VIDEO
COMPUTER
DOC.CAMERA
ASPECT
AUTO
SEARCH
MAGNIFY
FREEZE
PAGE
UP
ON
DOWN
OFF
KEYSTONE
MY BUTTON
1
2
POSITION
ENTER
ESC
BLANK
VOLUME
MUTE
MENU
RESET
17

Advertisement

Table of Contents
loading

Table of Contents