Table of Contents
Advertisement
Quick Links
Instruction Manual
10/100 MM Fiber to Ethernet Media Converter SC/ST with PoE
MCM110SC2P / MCM110SC2PGB
MCM110ST2P / MCM110ST2PGB
DE: Bedienungsanleitung - de.startech.com
FR: Guide de l'utilisateur - fr.startech.com
ES: Guía del usuario - es.startech.com
IT: Guida per l'uso - it.startech.com
NL: Gebruiksaanwijzing - nl.startech.com
PT: Guia do usuário - pt.startech.com
Packaging Contents
• 1 x Fiber to Ethernet Media Converter
• 1 x Power Adapter (
MCM110SC2P and
• 1 x Instruction Manual
System Requirements
• 10/100Base compatible network
• For PoE operation: 802.3af compliant PSE (Power
Sourcing Equipment)
Installation
Connect the Ethernet cable to the Fiber Media Converter
1.
"LAN" port.
Connect the other end of the Ethernet cable to the router/
2.
switch/computer NIC. If connecting the media converter to
a 802.3af compliant PSE, skip Step 3.
Optional (Non-PoE operation): Plug a power adapter into
3.
the media converter, and into an available AC power outlet.
Connect the fiber cable into the fiber receptacle on the
4.
media converter.
Connect the other end of the fiber cable into the router/
5.
switch/computer NIC/another media converter. Remember
to reverse the TX and RX leads between the two devices.
For the most up-to-date information, please visit: www.startech.com
MCM110ST2P only)
LED Indicators
LED
Function
Power
PWR
Indicator
Fiber Link/
FX Link/Act
Activity
Power over
POE
Ethernet
100
Mode
Full
Duplex Mode
Ethernet Link/
TX Link/Act
Activity
*actual product may vary from photos
State
Status
Converter has
ON
Power
Converter has no
OFF
Power
ON
Fiber Link on
OFF
No Link Detected
Flashing
Receiving Data
PoE mode
ON
enabled
PoE mode not
OFF
enabled
ON
100Mbps
OFF
10Mbps
ON
Full Duplex Mode
Half Duplex
OFF
Mode
Ethernet link
ON
Detected
OFF
No Link Detected
Flashing
Receiving Data
Manual Revision: 04/23/2012
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for StarTech.com MCM110SC2P
- Page 1 “LAN” port. 100Mbps Connect the other end of the Ethernet cable to the router/ Mode switch/computer NIC. If connecting the media converter to 10Mbps a 802.3af compliant PSE, skip Step 3. Full Duplex Mode Optional (Non-PoE operation): Plug a power adapter into Full Duplex Mode Half Duplex the media converter, and into an available AC power outlet. Mode Connect the fiber cable into the fiber receptacle on the Ethernet link media converter. Detected Ethernet Link/ Connect the other end of the fiber cable into the router/ TX Link/Act Activity No Link Detected switch/computer NIC/another media converter. Remember Flashing Receiving Data to reverse the TX and RX leads between the two devices. For the most up-to-date information, please visit: www.startech.com Manual Revision: 04/23/2012...
- Page 2 Specifications MCM110SC2P / MCM110SC2PGB MCM110ST2P / MCM110ST2PGB 1 x RJ45 Ethernet 1x RJ45 Ethernet Connectors 2 x SC Fiber 2x ST Fiber 1 x power connector 1x Power Connector Power Power Fiber Link/Activity Fiber Link/Activity Ethernet Link/Activity Ethernet Link/Activity LEDs 10/100 10/100 Full/Half Duplex Full/Half Duplex Fiber Type Multi-Mode Multi-Mode Maximum Distance 2 km 2 km IEEE802.3 10BASE-T IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX IEEE802.3u 100BASE-TX Transmission Standards l00BASE-FX 100BASE-FX IEEE802.3af PoE PD (Class 3)
Need help?
Do you have a question about the MCM110SC2P and is the answer not in the manual?
Questions and answers