Contents Preparation ....................................4 Unpacking the TV ........................................4 Installing / Removing the Base Stand ................................5 Front / Top / Side View and Controls ................................6 Rear View and Sockets ......................................7 Installing Batteries in the Remote Control ..............................8 Remote Control Operation Range ..................................8 Remote Control ........................................9 Connections ....................................
Page 3
Customising the TV Settings (PC Mode) ..............................32 Customising the TV Settings (HDMI and YPbPr Modes)........................32 Teletext (TV Mode) ......................................33 − To Turn on Teletext Function ................................33 Digital Teletext (DTV Mode) ..................................... 34 − Teletext within Digital Service ................................
Preparation Congratulations on the purchase of your new Logik TV. Your new TV has many features and incorporates the latest technology to enhance your viewing experience. We recommend that you spend some time reading this instruction manual in order that you fully understand these features.
Installing / Removing the Base Stand Remove the base stand before mounting the TV onto the wall. The LCD display is very fragile, and must be protected at all times when installing and removing the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display, comes into contact with it. DO NOT exert pressure on the front of the TV at any time because the screen could crack.
Front / Top / Side View and Controls Item Description Illuminates blue when the TV is turned on. Illuminates red when the TV is in standby POWER LED mode. The LED will illuminate blue when the timer programming has started in the standby mode.
Rear View and Sockets Item Description Connect the mains cable to the mains socket. S-VIDEO Connect to a VCR, DVD Player, or other AV devices with S-Video output sockets. Allows the insertion of a USB storage device. You can view media files or record DTV DVR USB port programmes through this port.
Installing Batteries in the Remote Control Press and lift the back cover up to open the battery compartment of the remote control. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
Remote Control 1 Transmission Indicator Illuminates red when you press a button. Switch the TV between on and standby mode. Mute and restore your TV sound. 4 P.MODE Selects picture mode: Personal / Standard / Movie / Mild / Game. S.MODE Selects sound mode: Standard / Music / Voice / Theatre / Personal.
Page 10
14 SOURCE Select among the different input signal sources: DTV / TV / DVD / AV / S-VIDEO / SCART / YPBPR / HDMI / 15 CH +/- Select a channel. 16 VOL +/- Adjust the volume. 17 MENU Display the OSD (On Screen Display) menu. 18 EXIT Exit the OSD (On Screen Display) menu.
Page 11
26 REVEAL Reveal hidden information such as the answer to a quiz in Teletext. (TV mode) REPEAT Repeat a title, chapter, track or whole disc. (DVD mode) 27 CANCEL To cancel the teletext mode completely. (TV mode) Repeat a segment between A and B. (DVD mode) 28 SUBPAGE Display the subpage on the teletext screen.
Connections Making Video and Audio Connections Not all AV devices have the ability to connect to a TV, please refer to the owner’s manual of your AV device for compatibilty and connection procedures. When connecting any external AV device, do not connect the mains cable to the mains socket until all other connections are complete.
Connecting a Computer with VGA Cable Use a VGA cable to connect the TV’s VGA input Right Rear Side View of TV socket to a computer’s VGA output socket. Use an audio cable to connect the TV’s PC AUDIO input socket to the computer’s audio output socket.
Connecting an AV Device with SCART Cable Right Rear Side View of TV Use a SCART cable to connect the TV’s SCART input socket to an external AV device’s SCART output socket. Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the side of the TV.
Connecting an AV Device with Composite Cable Right Rear Side View of TV Use the supplied AV cable to connect the TV’s AUDIO(L/R)/VIDEO input sockets to an external AV device’s composite audio/video sockets. (Video = yellow, Audio Left = white, and Audio Right = red) Plug the connected devices into the mains socket before switching on the POWER ON/OFF switch at the side of the TV.
Connecting Earphones Connect your earphones to the TV’s socket. Right Rear Side View of TV Before putting on earphones, turn the volume down then put the earphones on and slowly increase the volume until you reach a comfortable listening level. Listening to loud sounds for prolonged periods of time may permanently damage Earphones Cable...
Connecting the Aerial Connect one end of the RF coaxial cable to the aerial socket on the wall and the other end of the cable to the RF (75Ω) socket on the right rear side of your TV. Do not connect the TV to the mains supply until you have completed all the connections.
Selecting the Input Source SOURCE button to display the input source list. Press the Press the buttons to select the input source that you want: DTV / TV / DVD / AV / S-VIDEO / SCART / YPBPR / HDMI / PC. Press the OK button to confirm your selection.
Using the Features Customising the PICTURE Setting Picture Mode Allows you to set your preferred picture mode. MENU button and then use the buttons to select the PICTURE Press the menu and then press the button. Press the buttons to highlight an individual Picture option. Press the buttons to change the following settings.
Customising the SOUND Setting Sound Mode Allows you to select an audio-enhancement technique. MENU button and then use the buttons to select the SOUND Press the menu and then press the button. Press the buttons to highlight an individual Sound option. Press the buttons to change the following settings.
Customising the FUNCTION Setting Video Size Allows you to watch the screen in various picture formats. For TV Mode, Auto / Full / 4:3 / 14:9 / Zoom are the available options. For DTV mode, Auto / Full are the available options. For YPbPr and HDMI mode, Full / 4:3 are the available options. Press the MENU button and then use the buttons to select the...
TT Language Allows you to select your preferred Teletext language. Press the MENU button and then use the buttons to select the FUNCTION menu and then press the button. Press the buttons to select TT Language. Press the buttons to change the settings. MENU button to save the setting and return back to the previous Press the menu.
OSD Timer Allows you to select the display time of the on-screen menu. Press the MENU button and then use the buttons to select the FUNCTION menu and then press the button. Press the buttons to select OSD TIMER. Press the buttons to select time: 5 / 10 / 30 / 60 sec / NEVER.
Press the button and then press the button to select CHANGE CODE. 0–9 buttons to input a 4-digit password. Use the The default password is “0000”. If you change the password, be sure to remember the new password! If you forget your password, press the master password “8899” on the remote control.
Reset Restores all settings to factory defaults. Press the MENU button and then use the buttons to select the FUNCTION menu and then press the button. Press the buttons to select RESET and then press the OK button or the button.
Customising the TV Setting (TV Mode) Country Allows you to select the country where you are using the TV. MENU button and then use the buttons to select the TV menu Press the and then press the button. Press the buttons to select COUNTRY.
Manual Tuning Allows you to make manual fine tuning adjustments if the channel reception is poor under TV mode. In the TV menu, press the buttons to select MANUAL TUNING and then press the OK button or the button. Press the buttons to change the following settings.
To Lock buttons to highlight a channel and then press the BLUE Press the button. Press the BLUE button again to unlock. To Move Press buttons and then press the button to select a channel. Press buttons to move the selected channel. Press the OK button to confirm.
Manual Tuning Allows you to make manual fine tuning adjustments if the channel reception is poor under DTV mode. Press the MENU button and then use the buttons to select the DTV menu and then press the button. Press the buttons to select MANUAL TUNING and then press the OK button or the button.
Timer Timer programming is only available when a USB storage device is connected. Press the MENU button and then use the buttons to select the DTV menu and then press the button. Press the buttons to select TIMER and then press the OK button or the button.
CI (Common Interface) (DTV Mode) The common interface allows the use of a Common Access Module to enable you to view scrambled (pay to view) services. These services are provided by TopUp TV (UK only) and others. The Common Access Module and viewing card can be obtained from the service provider.
Customising the TV Settings (PC Mode) Allows you to adjust the PC desktop content. MENU button and then use the buttons to select the PC menu Press the and then press the button. Press the buttons to highlight an individual PC Position option. Press the buttons to change the following settings.
Teletext (TV Mode) Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. Using the Teletext control buttons you can view pages of information that are listed in the teletext index.
Digital Teletext (DTV Mode) Digital teletext can access special digital teletext services and specific services which broadcast digital teletext. The subtitle will temporarily auto off when digital teletext function is turned on. Teletext within Digital Service In DTV mode, press the OK button to display the Channel List.
Using the Features via USB Port My Album SOURCE button and select DTV mode and then press the MEDIA Press the button. Press the buttons and then press the OK button to select My Album. Press the BLUE button to open the directory. Press the buttons to select your desired folder and then press the OK button to enter the folder.
My Music SOURCE button and select DTV mode and then press the MEDIA Press the button. Press the buttons and then press the OK button to select My Music. Press the buttons to navigate in the music folder. Select the music you want to play and then press the OK button to play it.
DISPLAY button If more than one USB storage device is connected, press the to switch to the device type menu. Press the buttons to select the active device and then press the OK button to confirm. Press the buttons to navigate in the movie folder. Select the movie you want to play and then press the OK button to play it.
To Play In the Recorded List, press the buttons to select the recorded programme you want to view. Press the GREEN button to preview the recorded programme and then press the OK button to play the selected programme. If the selected programme was stopped before it had finished the last time you viewed it, the “DVR PLAY OPTION”...
Press the buttons to adjust the settings. Device Type Indicates that a USB device is connected. Slot Select the active USB storage device connected to the USB hub slot (1 Partition Select the active partition (1 … max.15) on the selected USB device. RED button to select Format.
DVR (Digital Video Recorder) Time Shift Function This function allows the TV to automatically record live TV and make it available for viewing at any time. With the Time Shift Mode set to Auto or Pause, you may pause or rewind normal TV viewing at any time without missing any of the live broadcast.
Recording DTV Programme onto a USB Storage Device Use this function to record the DTV programme you are watching on the main screen and save them for future viewing. You may use the DVR Time Shift function during recording to view the recorded programme instantly. Please refer to the section “Time Shift Function”...
Timer Programming This function is used to perform scheduled recording. EPG button on the remote control. The EPG menu will appear. Press the RED button on the remote control to enter the Timer Programming Press the menu. Alternative You may press the MENU button and then use the buttons to select the DTV menu and then press the button.
Using the DVD Features Using the Built-in DVD Player SOURCE button and select DVD mode. Press the Insert a disc with label side facing backward to you. (CD-R, CD-RW, DVD-R, DVD-RW, CD, DVD+R, or DVD+RW). Allow 10 seconds for the player to load the disc.
Basic DVD Playback Functions Playing the DVD Depending on the disc, a menu may appear on the TV screen once the disc has loaded. When playing the disc, you may use the button to toggle between Play and Pause mode. This product also supports Menu / Title / Sequential / Program Playback. Menu Playback (for DVD) For DVD discs, the screen will display the DVD Disc Menu (Root Menu).
Info (for DVD / CD / Multimedia discs) Press the INFO button to activate the on screen roll-down menu for the current Title, Chapter, Time and other information. For DVD discs, press the INFO button once to display the first page as shown below: Disc Type -/- (Current / Full) -/- (Current / Full)
Using the DVD System Setup Page In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the System Setup menu, and the buttons to select the menu options. Press the DVD Setup button to exit the menu. In Setup mode, the disc playback function will not be available.
Option Description PASSWORD PASSWORD MODE Select to change old password to new password. (Factory default is 0000) PASSWORD CHANGE To change the password, you need to: Input old password. Input a new 4 digit password. Input the new password again to confirm. RATING RATING Allows the user to set a maximum rating level for a movie...
Option Description SUBTITLE LANG SUBTITLE Select the Subtitle language. Not all DVD’s offer subtitles in multiple languages. MENU LANG DISC MENU Select the Disc Menu language. The default language is English. Using the DVD Audio Setup Page In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Audio Setup menu, and the buttons to select the menu options.
Using the DVD Speaker Setup Page In the DVD mode, press the DVD SETUP button on the remote control. Press the buttons to select the Speaker Setup menu, and the buttons to select the menu options. Press the DVD Setup button to exit the menu. In Setup mode, the disc playback function will not be available.
Maintenance Careful and regular cleaning can prolong the life of your TV. Be sure to switch off the POWER ON/OFF switch and disconnect the mains cable from the mains socket before you start any cleaning. Use a soft dry cloth to wipe away the dust from the screen and surfaces. If the surfaces are extremely dirty, clean the TV with a cloth which has been dipped in a weak soapy water.
Hints and Tips If a problem does occur, it may often be due to something very minor. The following table contains various tips. The TV does not operate properly. • Check to see if there are any objects between the TV and the remote control causing an obstruction.
Page 52
There is a problem in PC mode. The signal is out of range (Invalid • Adjust resolution, horizontal frequency, or vertical frequency. format) Vertical bar or stripe on background • Use Auto configure or adjust clock, phase, or H/V position. &...
Display Modes The screen resolution has been optimised during production for the display modes listed below. Whilst the TV is capable of accepting a 1080p input, it is not capable of displaying this screen resolution and therefore the display will be scaled to fit the native resolution of the screen automatically. YPbPr Mode Resolution Vertical Frequency (Hz)
Specification Model L22DVDB10 Panel System 21.6 inch LCD panel Display Resolution 1920 pixels (horizontal) x 1080 pixels (vertical) Television System PAL I/BG/DK, SECAM L/BG/DK Brightness 200-280 cd/m Contrast Ratio 700-1000:1 Inputs/Output SCART HDMI PC AUDIO S-VIDEO YPbPr VIDEO IN (RCA)
Safety Warnings Safety • Read all the instructions carefully before using the unit and keep them for future reference. • Always disconnect the unit from the mains supply before connecting/disconnecting other devices or • Retain the manual. If you pass the unit onto a third moving the unit.
Page 56
Earphones CAUTION • Listening to loud sounds for prolonged periods of time may permanently damage your hearing. RISK OF ELECTRIC SHOCK DO NOT OPEN • Before putting on earphones, turn the volume down The lightning flash with arrowhead symbol, then put the earphones on and slowly increase the within an equilateral triangle, is intended to volume until you reach a comfortable listening level.
Page 60
If you require a replacement for any of the items listed below, please quote their corresponding part numbers: Replacement Part Part Number Remote Control I.14.000000589 Batteries (x2) E.17.101570001 AV Cable E.14.113150013 Base Stand I.01.526302031 Screws x 4 I.03.MP4010001 Instruction Manual I.08.015229001 Quick Start Guide I.08.035229002...
Need help?
Do you have a question about the L22DVDB10 and is the answer not in the manual?
Questions and answers