Specifications - ACDelco ARI810 Product Information Manual

Max. Tightening Torque
Max. Reverse Torque
Impacts per Minute
INSTALLING OR REMOVING BATTERY PACK
TO REMOVE BATTERY PACK: Depress the battery pack release button (7) and pull
the battery pack (8) out of tool.
TO INSTALL BATTERY PACK: Push the battery pack (8) onto tool until it locks in
place.
INSTALLING SOCKETS
Always follow the procedure below to install a socket.
1. Insert a socket into the anvil (2).
2. Make sure the bit is fixed in the anvil while clicking on the ball of the anvil.
REMOVING SOCKETS
Always follow the procedure below to remove a socket.
CAUTION
1English1

SPECIFICATIONS

Model Number
Voltage
Drive
No Load Speed
Tool Weight
ASSEMBLY
Always set switch (5) to off position when installing and
removing socket.
ARI810
3/8" Square
75 ft-lbs (100 Nm)
115 ft-lbs (155 Nm)
0-2,600 RPM (/min)
0-3,100 IPM
1.87 lbs (0.85 kg)
English -8
ARI810-2
8 Vdc
1/4" Square
66 ft-lbs (90 Nm)
103 ft-lbs (140 Nm)
1.87 lbs (0.85 kg)