Barco Galaxy WARP 10 HB Owner's Manual
  1. Manuals
  2. Brands
  3. Barco Manuals
  4. Dlp projector
  5. Galaxy WARP 10 HB
  6. Owner's manual
Barco Galaxy WARP 10 HB Owner's Manual

Barco Galaxy WARP 10 HB Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Barco Galaxy WARP™ 10 HB
Owner's Manual
R9040330
R5976698/00
05/04/2004

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Galaxy WARP 10 HB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Barco Galaxy WARP 10 HB

Summary of Contents for Barco Galaxy WARP 10 HB

  • Page 1 Barco Galaxy WARP™ 10 HB Owner’s Manual R9040330 R5976698/00 05/04/2004...
  • Page 2 Barco nv Simulation Products 600 Bellbrook Ave, Xenia OH 45385 Phone: +1 (937) 372 7579 Fax: +1 (937) 372 8645 E-mail: eis@barco.com Visit us at the web: www.eis.barco.com Barco nv Simulation Products Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.36.84.86 E-mail: info@barco.com...
  • Page 3 The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning, at latest 30 days after the transfer of risks. In the event of justified notice of compliant, Barco can repair the fault or provide a replacement at its own discretion within an appropriate period.

  • Page 5: Table Of Contents

    File annotation ....................... . . 47 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 6 6.5.7.9.10 Basic Soft Edge Width Set up ................. . .104 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 7 Index........................147 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 8 Table of contents R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 9: Safety Instructions

    Dispose of used batteries according to the manufacturer’s instructions. 1.2 Restricted Access Location Installation in a Restricted Access Location The Barco Galaxy WARP™ 10 HB can only be installed in a Restricted Access Location. What is a Restricted Access Location (Definition)? Definition of a Restricted Access Location: A location for equipment where both of the following paragraphs apply: •...

  • Page 10: Fcc Statement

    Extra Safety manual Read also safety instructions in separate manual (R5976125). R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 11: Packaging And Dimensions

    Dimensions 2.1 Box Content Content • 1 projector Barco Galaxy WARP™ 10 HB (weight ± 56 kg or 123.5 lbs without lens) • 1 Remote Control Unit (RCU) + 2 Batteries 1,5V) • 1 European and 1 American Power Cable •...
  • Page 12 2. Packaging and Dimensions Image 2-2 Left View Dimensions Image 2-3 Top View Dimensions R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 13: Installation Guidelines

    Damage of this nature is under no circumstances covered under the manufacturer’s warranty and may deem the warranty null and void. In such a case the client shall be held solely responsible for all costs incurred during any R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 14: Restricted Access Location

    4 to 3. 3.2 Restricted Access Location Installation in a Restricted Access Location The Barco Galaxy WARP™ 10 HB can only be installed in a Restricted Access Location. What is a Restricted Access Location (Definition)? Definition of a Restricted Access Location: A location for equipment where both of the following paragraphs apply: •...

  • Page 15: Projector Position

    Positioning the projector The Projector should be installed perpendicular with the screen on a distance PD and water leveled in both directions. The mounting positions in following images are shown for a nominal lens position. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 16 B = Distance between floor and bottom of the screen. CD = Total distance between projector and floor. SW = Screen Width. SH = Screen Height (Image height). PD = Projector Distance, distance between screen and projector. Image 3-3 Front Table Configuration R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 17: Safety Area Around The Projector

    Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Leave a safety area A of about 1 meter on the left and the right side of the projector. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 18: Re-Adjusting The Lamp Position In The Lamp Casing

    4. Select Lamp. The Z-axis indication (lamp menu in service mode) will be helpful while turning screw B . (menu 3-3) 5. Loosen the nut A (image 3-7)on the back of the lamp casing (nutdriver 10). R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 19 Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return <EXIT> to return then <ENTER> <EXIT> to return. Menu 3-2 Menu 3-3 Menu 3-4 Image 3-6 Lamp adjustment access Image 3-7 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 20: Lenses

    Formulas Metric formulas (meter) Inch formulas (inch) TLD(0.8:1) PD=0.84xSW-0.05 PD=0.84SW-1.97 TLD(1.2:1) PD=1.20xSW-0.01 PD=1.20xSW-0.39 TLD(1.6–2.0:1) =1.59xSW-0.09 =1.59xSW-3.54 =2.00xSW-0.13 =2.00xSW-5.12 TLD(2.0–2.8:1) =2.00xSW-0.17 =2.00xSW-6.69 =2.84xSW-0.24 =2.84xSW-9.45 TLD(2.8–5.0:1) =2.80xSW-0.16 =2.80xSW-6.30 =5.10xSW-0.38 =5.10xSW-14.96 TLD(5.0–8.0:1) =4.90xSW-0.01 =4.90xSW-0.39 =8.16xSW-0.29 =8.16xSW-11.42 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 21: Lens Installation

    3. Installation Guidelines Lens program to calculate the projector distance is available on the BARCO web side : http://www.barco.com/projection systems/customer services/lens program.asp 3.7.4 Lens Installation How to install ? Follow the next procedure: 1. Remove the foam rubber in the opening of the lens holder.

  • Page 22: Battery Installation In The Rcu

    2. Lift up the top side of the cover at the same time. 3. Insert the 2 new 1,5 V batteries as indicated in the RCU. (image 3-10) 4. Put the battery cover back on its place. RCU Top Image 3-10 Battery installation R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 23: Connections

    ENTER PAUSE TEXT EXIT STANDBY PHASE ENTER TEXT PAUSE SHARPN TINT SHARPN TINT BRIGHTN COLOR PHASE COLOR CONTRAST BRIGHTN CONTR TREBLE BALANCE BASS Image 4-1 Stand by keys on RCU and local keypad R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 24: Switching To Standby

    Image 4-2 Press ENTER to remove this warning. Always replace with the same type of lamp, call a BARCO authorized service technician for this lamp replacement. AUTION Using a lamp for more than 500 (Typical) or 1000 (Maximum) hours is dangerous as the lamp could explode.

  • Page 25: Input Connections

    Input 1 has 5 BNC Input Terminals for 5 Cable Input. Which signals can be connected to input 1? Input Signal RGBHV – RGBS – – 1. Can not be used for Stereo Sources R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 26: Input 2

    Pin 5 Pin 17 TMDS DATA4+ TMDS DATA0- Pin 6 DDC Clock Pin 18 TMDS DATA0+ Pin 7 DDC Data Pin 19 TMDS DATA0/5 Shield Pin 8 No connect Pin 20 TMDS DATA5- R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 27: Inputs Via Rcvds05

    4.6.1 Linked System AUTION Always use the Barco COM 800 Splitter, R9827941 (240V) or R9827948 (110V), when using the COM 800 protocol. What can be done? In a complex multi-channel setup, projectors can be controlled using the RS232 or COM800 Protocol.
  • Page 28 How to connect a COM800 Setup Always use the Barco COM 800 Splitter, R9827941 (240V) or R9827948 (110V), when using the COM 800 protocol. 1. Use a data cable with at least 9 cores and 2 DB9 female connectors, just cross the pin 2 and pin 3 connection to make a Custom Null Modem Cable.
  • Page 29 4. Connections Female Connector Pin Number 4 5 6 7 8 9 Pin Number 1 2 3 4 5 6 7 8 9 Female Connector Image 4-5 Make a Custom Null Modem Cable R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 30 CTRL 3 CTRL 2 Hardwired Sync OK remote CTRL 1 RS 232/422 IN RS 232/422 OUT COMM PORT 10(/100)BASE-T Read instructionsbefore connecting periphals To next COMM 800 Splitter Image 4-6 Com 800 Connection R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 31: Rs232 (Rs422) Connection

    1. Connect the stereo emitter signal from the Image Generator to the Mini DIN input of the Left/Right Phasing module. (image 4-7) Note: On some IG’s, the Stereo Sync is already present in the Vertical Sync Signal. 2. Connect the IR emitters to the BNC output(s) of the Left/Right Phasing module. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 32: Multi-Channel Stereo Connections

    For more detailed information on how to adjust these parameters (see "Stereo Options", page 111). For more detailed information on synchronous /asynchronous mode (see "Forced Asynchronous", page 117). R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 33: Single Cadwall Configuration

    Phased L/R SIGNAL L/R SIGNAL Projector 3 High Bandwidth RGB INPUT DVI INPUT Phased L/R SIGNAL L/R SIGNAL IR Emitter IR Emitter CadWall Active Glasses Image 4-8 Stereo Signal Connections in a Single CADWall Configuration R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 34: Multiple Cadwall (Showroom Installation)

    4. Connect the ’IR Emitters to a free ’Phased L/R Signal’ BNC Connector on a projector that is set to Synchronous Mode. All projectors will run on a common Stereo Sync (Phased L/R) Signal. All Stereo IR Emitters in the room will work in sync. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 35 DVI INPUT High Bandwidth RGB INPUT Phased L/R SIGNAL L/R SIGNAL Projector 6 DVI INPUT High Bandwidth RGB INPUT Phased L/R SIGNAL L/R SIGNAL Image 4-9 Stereo Signal Connections in a Multiple CADWall Configuration R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 36 4. Connections R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 37: Getting Started

    "pause" (blanked picture, full power for immediate restarting) • direct access to all connected sources. 5.2 Terminology overview Overview The following table gives an overview of the different functionalities of the keys. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 38 ’TEXT’ key first. To re-display the bar scale on the screen, press ’TEXT’ key again. ENTER to start up the adjustment mode or to confirm an adjustment or selection in the adjustment mode. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 39: Operating The Projector

    Press a digit button to select an input source. EXIT ENTER PAUSE TEXT EXIT STANDBY PHASE ENTER TEXT PAUSE SHARPN TINT TINT SHARPN BRIGHTN PHASE COLOR COLOR CONTRAST BRIGHTN CONTR TREBLE BALANCE BASS Image 5-2 Standby key R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 40: Switching To Standby

    Overview • Quick Lens Adjustment • Quick OSD Color Change 5.4.1 Quick Lens Adjustment What can be done? This will adjust the zoom, focus, horizontal shift and vertical shift settings of the lens. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 41: Quick Osd Color Change

    45° Image 5-5 Shift Capability for the available lenses in a Front / Table configuration 5.4.2 Quick OSD Color Change What can be done? Quick change of the color of the highlighted items. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 42: Using The Rcu

    When using the wireless remote control, make sure you are within the effective operating distance, in a straight line: 30m (100ft). The remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the remote control unit and the projector IR sensor. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 43 5. Getting Started Image 5-6 RCU to IR Sensors R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 44 In case there is IR communication between the RCU and the projector the Green IR–Acknowledged Led will light up. Image 5-8 IR-Acknowledged Led Pointing to the Reflective Screen 1. Point the front of the RCU to the reflective screen surface. (image 5-9) R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 45 2. Plug the other end in the connector in the front panel of the projector labelled CTRL 1. (image 5-10) Image 5-10 RCU to Hardwired Remote Input When using the Hardwired Remote Input the IR Sensor on the projector is disabled, the projector can only be controlled by the hardwired connected RCU. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 46: Controlling The Projector

    Regardless of the Projector Address, the projector will still respond to a RCU set to address ’0’ or ’1’ through the Common Address. How to set the Projector Address? See ’Change Projector Address’ in chapter ’Service Mode’. 5.6.3 RCU Address The RCU Address can be any digit between ’0’ and ’9’. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 47: Input Selection

    (image 5-13) Brightness 50 EXIT ENTER PAUSE TEXT Image 5-13 Barscale indication PHASE SHARPN TINT COLOR BRIGHTN BRIGHTN CONTR TREBLE BALANCE BASS Image 5-12 Picture Control key R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 48: Menus On Local Lcd Display

    Adjustments can be done while the projector is running without projecting the disturbing menus on the screen. Use the cursor keys to scroll through the menus and press ENTER to activate the displayed menu. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 49: Random Access

    File Sort [Name/Index] File Load [Automatic/Manual] Serial File Load [On/Off] • Picture Tuning Gamma Input Balance White Balance Black Balance Default Windowing Blanking Shift Size Geo Soft Edge [On/Off] 2. Only available in Stereo Mode R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 50: Starting Up Random Access

    FILE SERVICE PICTURE TUNING RANDOM ACCESS GEOMETRY INSTALLATION STEREO OPTIONS SERVICE Source 1 Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return Menu 6-1 Menu 6-2 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 51: File Service

    The second and third character is used for a following number (= file index). The file index for custom files : 01 to 20. source number ppppXpppp active pixel rating i or blank i = interlaced file blank = not interlaced Table 6-1 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 52: Possible File Manipulations

    OPTIONS ---------------------------- Active file : xga_60.c04 Select with ↑ or ↓ Select with ↑ or ↓ , → then <ENTER> <ENTER> to accept <EXIT> to return <EXIT> to return Menu 6-5 Menu 6-6 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 53: Edit Warp1

    When a Mono Image is projected, within this menu, it is possible to change the File Settings of a selected source file. • When a Stereo Image is projected, within this menu, it is possible to change the File Settings for the Left Image of a selected source file. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 54: Edit Warp2

    The 3 different methods to change a setting will be described hereafter. These methods are: • with the numeric keys on the remote control. • with the arrow keys selecting the changing digit. • with the arrow keys counting up or down. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 55: Correct Value

    If not, adjust until full image height is displayed (no missing lines) Vertical Start number of lines between the start of the input signal and start of the image on the screen. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 56 If the active Stereo Compatibility Option is installed, the field select parameter will be changed into a [left] and [right] selecting parameter which will be selectable for stereo files. This setting will then be saved in the active image file. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 57: Edit Warp2 File

    ---------------------------- OPTIONS Active file : xga_60.c04 Select with ↑ or ↓ Select with ↑ or ↓ , → then <ENTER> <ENTER> to accept <EXIT> to return <EXIT> to return Menu 6-17 Menu 6-18 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 58: Copy File

    ---------------------------- OPTIONS Active file : xga_60.c04 Select with ↑ or ↓ Select with ↑ or ↓ , → then <ENTER> <ENTER> to accept <EXIT> to return <EXIT> to return Menu 6-20 Menu 6-21 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 59: Delete File

    Select with ↑ or ↓ , → Reprogram with ↑ or ↓ then <ENTER> <ENTER> to accept <ENTER> to confirm <EXIT> to return <EXIT> to return <EXIT> to return Menu 6-23 Menu 6-24 Menu 6-25 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 60: File Options

    The user will select and load the desired file. FILE OPTIONS FILE SORT [NAME] FILE LOAD [AUTOMATIC] SERIAL FILE LOAD [OFF] Select with ↑ or ↓ <ENTER> to accept <EXIT> to return Menu 6-28 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 61: Picture Tuning

    Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-30 6.4.2 Gamma What can be done? With the gamma correction adjustment, it is possible to match the Gamma of the IG and the Projector. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 62: Input Balance 1

    Select with ↑ or ↓ then <ENTER> <EXIT> to return Select with ↑ or ↓ Adjust red with ↑ or ↓ then <ENTER> blue with ← or → <EXIT> to return Menu 6-32 Menu 6-33 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 63 2. Push the cursor key ↑ or ↓ to highlight White Balance and press ENTER to select. (menu 6-35) 3. Use the cursor keys ← and ↓ to lower the Gain of the Blue and Red color. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 64 Select with ↑ or ↓ then <ENTER> <EXIT> to return Adjust red with ↑ or ↓ blue with ← or → Menu 6-35 Image 6-5 Full white image on the source Image 6-6 Perfect White Balance R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 65: Input Balance 2

    <ENTER> blue with ← or → <EXIT> to return Menu 6-37 Menu 6-38 6.4.5 Windowing Overview • Starting Up Windowing • Blanking (Windowing) • Shift (Windowing) • Size (Windowing) • Geo Soft Edge R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 66: Starting Up Windowing

    A barscale indication will be displayed. (image 6-7) 3. Push the cursor keys to black out the side(s) of the image. (image 6-8) BLANKING BOTTOM LEFT RIGHT RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-43 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 67 1. Push the cursor key ↑ or ↓ to highlight Reset. (menu 6-44) 2. Press ENTER to reset all blanking adjustments. BLANKING BOTTOM LEFT RIGHT RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-44 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 68: Shift (Windowing)

    WINDOWING BLANKING SHIFT SIZE GEO SOFT EDGE [ON] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-45 H SHIFT Image 6-9 Horizontal Shift barscale Image 6-10 Horizontal Shift (Windowing) adjustment R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 69: Size (Windowing)

    WINDOWING BLANKING SHIFT SIZE GEO SOFT EDGE [ON] Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-46 H SIZE Image 6-12 H Size barscale indication Image 6-13 Horizontal Size adjustment R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 70: Geo Soft Edge

    Overview • Introduction • Starting Up Geometry • Geometry file annotation • Setting up a new Geometry file • Possible Geometry file manipulations • Load • Edit • Rename • Copy • Delete R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 71: Introduction

    IG’s side. Since WARP 6™ is integrated in the Barco Galaxy WARP™ 10 HB Pixel Map Processor, it is an elegant and user-friendly solution for even the most demanding applications.

  • Page 72: Possible Geometry File Manipulations

    The selected geometry file will become the active file and the Geometry files menu will be displayed again. LOAD FILE PREVIEW[OFF] Filename geometry.g01 t_bowing.t06 t_bowlin.t02 t_keyst.t03 t_nodist.t01 ------------------------------- Active file : geometry.g01 Select with ↑ or ↓ , → <ENTER> to accept <EXIT> to return Menu 6-52 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 73: Edit

    6. Random Access 6.5.7 Edit Overview • Introduction • Start up • Coarse • Linearity adjustment • Fine • Shift • Transport Delay • Blanking • Electronic Soft Edge (Optional) • Reset R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 74: Introduction

    At the bottom of the structure we find the local points, adjusting these points will not affect any other grid points. • The best results are obtained by applying the geometry settings in the same top to bottom order as listed in the menu interface. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 75: Start Up

    <EXIT> to return Menu 6-55 Menu 6-56 6.5.7.3.2 Corner selection What can be done ? With the Coarse Corner selection it is possible to adjust the basic geometry and size of the projected image. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 76: Corner Adjustment

    Coarse adjustment, this will shift the Corner in steps of 1 pixel Subpixel Fine tuning adjustment, this will shift the Corner in steps of 1/32 of a pixel 3. This & indicates the position of the selected grid point within the 81 zones. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 77 = 0 y = 0 y = 0 subpixels x = 0 subpixels x = 0 y = 0 y = 0 Menu 6-58 Menu 6-59 Image 6-18 Corner pixel x adjustment R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 78: Side Bow Selection

    What can be done ? With the Coarse Side Bow selection it is possible to: • apply a bow shaped pre-distortion on the projected image. • perform a coarse linearity adjustment off the projected image. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 79 = 0 y = 0 y = 0 subpixels x = 0 subpixels x = 0 y = 0 y = 0 Menu 6-60 Menu 6-61 Image 6-21 Coarse Side Bow selections R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 80: Bow Shaped Pre-Distortion Set Up

    = 0 Menu 6-62 Image 6-22 Bow shaped pre-distortions 6.5.7.3.6 Coarse linearity adjustment using Side Bows The Linearity adjustment is best done when a reference test pattern is projected on the screen. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 81 = 4 row = 0 pixels x = 0 y = 0 subpixels x = 0 y = 0 Menu 6-63 Image 6-23 Using side bows to perform a coarse linearity adjustment R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 82: Center Selection

    3. Push the cursor key ↑ or ↓ to select pixel y = 0 in the Geometry Distortion menu. (menu 6-66) 4. Push the cursor key ← or → to coarse shift the Center in a vertical way. (image 6-26) R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 83: Linearity Adjustment

    GUIDED GEOMETRY MAP LINEARITY COARSE horizontal LINEARITY coarse 0 FINE right 0 SHIFT center 0 TRANSPORT DELAY BLANKING/SOFT EDGE RESET Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-67 Menu 6-68 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 84: Horizontal Or Vertical Linearity Selection

    8. Continue with the vertical linearity adjustment. LINEARITY LINEARITY LINEARITY horizontal horizontal horizontal coarse 0 coarse 0 coarse 0 right 0 right 0 right 0 center 0 center 0 center 0 Menu 6-69 Menu 6-70 Menu 6-71 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 85 6. Random Access Image 6-27 Horizontal Linearity coarse adjustment Image 6-28 Horizontal Linearity right adjustment Image 6-29 Horizontal Linearity center adjustment R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 86: Vertical Linearity Adjustment

    0 coarse 0 coarse 0 bottom 0 bottom 0 bottom 0 center 0 center 0 center 0 Menu 6-72 Menu 6-73 Menu 6-74 Image 6-30 Vertical Linearity coarse adjustment R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 87: Fine

    • Horizontal or Vertical Linearity selection • Fine Horizontal or Vertical Linearity adjustment • Bow Linearity selection • Bow Linearity adjustment • Quadrant selection • Quadrant adjustment • Local selection • Local adjustment R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 88: Start Up

    (image 6-33) GEOMETRY DISTORTION hor lin left top col = 2 row = 0 pixels x = 0 y = 0 subpixels x = 0 y = 0 Menu 6-77 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 89: Fine Horizontal Or Vertical Linearity Adjustment

    5. Continue with the Fine Bow Linearity adjustment or press EXIT to return to the Guided Geometry Map. GEOMETRY DISTORTION hor lin left top col = 2 row = 0 pixels x = 0 y = 0 subpixels x = 0 y = 0 Menu 6-78 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 90: Bow Linearity Selection

    = 2 pixels x = 0 pixels x = 0 y = 0 y = 0 subpixels x = 0 subpixels x = 0 y = 0 y = 0 Menu 6-79 Menu 6-80 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 91: Bow Linearity Adjustment

    4. Continue with the Fine Quadrant adjustment or press EXIT to return to the Guided Geometry Map. GEOMETRY DISTORTION bow lin top col = 4 row = 2 pixels x = 0 y = 0 subpixels x = 0 y = 0 Menu 6-81 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 92: Quadrant Selection

    = 2 pixels x = 0 pixels x = 0 y = 0 y = 0 subpixels x = 0 subpixels x = 0 y = 0 y = 0 Menu 6-82 Menu 6-83 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 93: Quadrant Adjustment

    4. Continue with the Fine Quadrant adjustment or press EXIT to return to the Guided Geometry Map. GEOMETRY DISTORTION quadrant left top col = 2 row = 2 pixels x = 0 y = 0 subpixels x = 0 y = 0 Menu 6-84 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 94: Local Selection

    = 0 y = 0 subpixels x = 0 subpixels x = 0 subpixels x = 0 y = 0 y = 0 y = 0 Menu 6-85 Menu 6-86 Menu 6-87 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 95: Local Adjustment

    5. Press EXIT to return to the Edit menu. GEOMETRY DISTORTION local col = 1 row = 0 pixels x = 0 y = 0 subpixels x = 0 y = 0 Menu 6-88 Image 6-40 Fine local adjustments R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 96: Shift

    Transport Delay is applied on the received image data. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 97 5. Push the cursor key ↑ or ↓ to highlight Transport Delay. (menu 6-98) 6. Push the → cursor key to set the Transport Delay to the maximum value in the set up, in this case set the Transport Delay manually to 250. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 98: Blanking

    FINE SOFT EDGE SHIFT TRANSPORT DELAY BLANKING/SOFT EDGE RESET Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return <EXIT> to return Menu 6-99 Menu 6-100 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 99: Blanking Active On

    2. Press ENTER to scroll through the available coarse shape selections: top, bottom, left and right. (image 6-42) 3. Push the cursor key ← or → to scroll through the available fine shape selections.image 6-42 SHAPE top left % of image = 0 %% of image = 0 Menu 6-105 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 100: Blanking Adjustment

    2. Push the cursor key ← or → to black out the left top side of the image (Follow this procedure in a similar way to apply a desired blanking adjustment)image 6-42. 3. Use the %% of image adjustments to fine shift the selected grid point. 4. When finished press EXIT to return to the Blanking/Soft Edge menu. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 101: Electronic Soft Edge (Optional)

    When working in a multichannel setup the WARP 6™ and its extensive Soft Edge possibilities enable an image blending that gives the appearance of a single view, thus achieving realistic immersion for the majority of simulation and virtual reality applications. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 102: Preparations

    It also has the ability to generate predefined patterns for standardized projection sys- tems. The software is developed to run on IRIX (Order numbers for Polaris: R9898300 for a 6 months license, R9893301 for a full license). R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 103: Soft Edge Start Up

    Before creating a soft edge, an overlap zone is created, the shape of this overlap zone is fully adjustable, within this menu the shape of the blending zone is aligned with the shape of the overlap zone. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 104: Soft Edge Shape Selections

    2. Press ENTER to scroll through the available coarse shape selections: top, bottom, left and right. (image 6-45) 3. Push the cursor key ← or → to scroll through the available fine shape selections.image 6-45 SHAPE top left % of image = 0 %% of image = 0 Menu 6-113 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 105: Basic Soft Edge Shape Set Up

    12.5 % overlap zone, apply the same procedures for every Electronic Soft Edge you want to create in a multi-projector system. Image 6-46 Basic Electronic Soft Edge set up Be sure the Soft Edge Active mode is set to [ON] for both projectors. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 106 4. Use the subpixel selections for fine adjustments. SHAPE SHAPE left all left all % of image = 0 % of image = 0 %% of image = 0 %% of image = 0 Menu 6-116 Menu 6-117 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 107: Soft Edge Width Start Up

    6.5.7.9.9 Soft Edge Width selections How to use the Soft Edge Width selection ? 1. Press ENTER to scroll through all available Soft Edge Width selections: top, bottom, left and right. (image 6-50) R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 108: Basic Soft Edge Width Set Up

    3. Press EXIT to return to the Blanking/Soft Edge menu. 4. Press EXIT to return to the Guided Geometry Map menu. 5. Press EXIT to return to the Edit menu. SOFT EDGE WIDTH RIGHT Image 6-51 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 109 4. Press EXIT to return to the Guided Geometry Map menu. 5. Press EXIT to return to the Edit menu. SOFT EDGE WIDTH LEFT Image 6-53 Image 6-54 Basic Width set up for Projector 2 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 110: Reset

    This action will LINEARITY reset the selected FINE geometry settings! BLANKING/SOFT EDGE are you sure? Select with ↑ or ↓ then <ENTER> <ENTER> to confirm <EXIT> to return <EXIT> to return Menu 6-121 Menu 6-122 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 111: Linearity Reset

    3. Push the cursor key ↑ or ↓ to highlight Soft Edge or All in the Soft Edge Reset menu. Soft Edge Only the Soft Edge Width values will be reset to their default values. All Blanking/Soft Edge values will be reset to their default values. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 112: Reset All

    This action will LINEARITY reset the selected FINE geometry settings! BLANKING/SOFT EDGE are you sure? Select with ↑ or ↓ then <ENTER> <ENTER> to confirm <EXIT> to return <EXIT> to return Menu 6-130 Menu 6-131 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 113: Rename

    No changes are made. RENAME FILE From file name: geometry.g01 To file name : demo.g01 Select with ← or → Reprogram with ↑ or ↓ <ENTER> to confirm <EXIT> to return Menu 6-134 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 114: Copy

    1. Push the cursor key ↑ or ↓ to highlight Delete. (menu 6-138) 2. Press ENTER. The delete selection menu will be displayed. (menu 6-139) 3. Push the cursor key ↑ or ↓ to select a file name. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 115: Stereo Options

    <ENTER> <EXIT> to return Menu 6-141 Menu 6-142 6.6.2 Stereo Phase What can be done ? With Stereo Phase it is possible to apply an adjustable time delay on the stereo emitter signal. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 116: Invert Stereo

    The Stereo Phase bar scale 6.6.3 Invert Stereo What can be done? With Invert Stereo we can invert the stereo emitter signal (Left eye opens when a right image is supplied to the projector) R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 117: Master Channel

    It is possible to force the projector into mono mode, by setting the Stereo Mode to Passive, only the left or the right image is displayed, Use the Master Channel menu to select either the Left or the Right image, this Master Channel will be displayed when the Stereo Mode is set to Passive. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 118: Stereo Mode

    The right image is projected, the right shutter is open, allowing the right eye to see the right image. The ideal situation is when the opening/closing times of these shutters are in sync with the blanking time of DLP mirrors. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 119 Left Shutter Open Closed Right Shutter Open Closed Image 6-59 Shutters closing too late and/or opening too early cause Cross-Talk Closing these shutters too quickly and/or opening too slowly will cause Color Artifacts. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 120 All projectors in the chain must have the same setting for Asynchronous Mode ! Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-147 STEREO DARK TIME Image 6-61 The Dark Time bar scale R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 121: Forced Asynchronous

    STEREO MODE [ACTIVE] DARK TIME FORCED ASYNCHRONOUS [NO] WARNING All projectors in the chain must have the same setting for Asynchronous Mode ! Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 6-148 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 122 6. Random Access R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 123: Installation Mode

    Front /Table Front / Ceiling Rear / Table Rear / Ceiling • OSD Color Green Yellow • Internal Patterns Outline Hatch Color Bars Multiburst Checker Board Purity Page Char Alpha-Numeric Chars Character Sets R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 124: Starting Up Installation

    <EXIT> to return <EXIT> to return Menu 7-3 Menu 7-4 The indication in front of the digit means: X : Valid Signal connected to the input. - : No Valid Signal connected to the input. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 125: No Signal

    <EXIT> to return <EXIT> to return Menu 7-5 Menu 7-6 7.4.2 Changing the Background Color What can be done? When no source signal is present a Blue or Black background color will be displayed. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 126: Changing The Shutdown Setting

    Enter the digits directly with the digit keys on the RCU. NO SIGNAL COLOR [BLUE] SHUTDOWN [OFF] SHUTDOWN TIME 0 MIN Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 7-9 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 127: Lens Adjustment

    3. Push the cursor key ↑ or ↓ to zoom and ← or → to focus the image. 4. Press EXIT to return to the Lens Adjustment menu. LENS ADJUSTMENT ZOOM/FOCUS SHIFT Select with ↑ or ↓ <ENTER> to select <EXIT> to return Menu 7-12 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 128: Lens Shift Adjustment

    <ENTER> to zoom/focus <EXIT> to return Image 7-2 7.6 Changing the Menu Position What can be done? The Menu can be displayed in the bottom right corner or the center of the displayed image. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 129: 800-Peripheral

    Which protocols are available ? When a RCVDS05 is connected to the projector, the type of communication protocol used to communicate with the peripheral has to be defined in the 800 peripheral menu. • • R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 130: Com800 Protocol

    1. Push the cursor key ↑ or ↓ to highlight Configuration. (menu 7-19) 2. Press ENTER to select. The configuration menu will be displayed. (menu 7-20) 3. Push the cursor key ↑ or ↓ to highlight the desired configuration e.g. Front / Table. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 131: Osd Color

    <ENTER> to accept <EXIT> to return <EXIT> to return Menu 7-21 Menu 7-22 7.10 Internal Patterns What can be done? The projector is equipped with different internal patterns which can be used for measurement purposes. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 132 OSD COLOR PAGE CHAR INTERNAL PATTERNS ALPHA-NUMERIC CHARS CHARACTER SETS Select with ↑ or ↓ Select with ↑ or ↓ then <ENTER> then <ENTER> <EXIT> to return <EXIT> to return Menu 7-23 Menu 7-24 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 133: Service Mode

    The service menu is build-up in two parts which are connected together with the ’more’ item. If the desired item is not in the list of the displayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 134: Starting Up Service

    What can be seen on the Identification Screen? The title page screen shows the general information of the projector. The following items will be displayed: • Type of projector: Barco Galaxy WARP™ 10 HB • Proj. address • Software version •...

  • Page 135: Change Password

    Within the Change Projector Address menu, following items can be changed: • Projector Address • Common Address For more information on Common and Projector Address see ’Controlling the projector’ in the chapter ’Getting Started’. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 136: Starting Up Change Projector Address

    Continue with the other digits on the same way. The individual address must be between 0 and 255. In a Linked CLO and/or Dynacolor™ setup a maximum of 14 projectors can be linked, all projectors must have a different projector address between 0 and 13. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 137: Changing The Common Address

    The baudrate of the projector must be the same as the baudrate of the connected computer. Use this menu to change the baudrate of the projector. The following baud rates are available: • 115200 • 57600 • 38400 • 19200 • 9600 • 4800 • 1200 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 138: Lamp Menu

    Indication to adjust the Z-axis of the lamp, for more information see ’Re-adjusting the lamp position in the lamp casing’ in chapter ’Installation Guidelines’ Table 8-1 Lamp Information Following Lamp Settings can be changed: • Constant Light Output • (Lamp) Mode R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 139: Constant Light Output (Clo)

    Run time : 140 hours Remaining run time : 1360 hours Number of strikes : Z-axis : 100 units _________________________________ Select with ↑ or ↓ <ENTER> to toggle <EXIT> to return Menu 8-15 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 140: Lamp Mode

    Starting Up Barco Logo What can be done? The Barco Logo can be added to the projected image, in overlay or on a background, on any place on the screen. How to Start Up the Barco Logo? 1. Push the cursor key ↑ or ↓ to highlight More. (menu 8-17) 2.

  • Page 141: Barco Logo Status

    1. Push the cursor key ↑ or ↓ to highlight Status. (menu 8-20) 2. Press ENTER to toggle Status [ON] or [OFF]. [ON] Barco Logo will be displayed on the screen [OFF] Barco Logo will NOT be displayed on the screen BARCO LOGO STATUS [OFF] BACKGROUND [OFF] SHIFT HOT KEY [OFF] Select with ↑...

  • Page 142: Shift Barco Logo

    2. Press ENTER to toggle the Hot Key Setting [ON] or [OFF]. [ON] The TEXT key on the RCU is used to display or to remove the Barco Logo with one single push on this key (only in operational mode)

  • Page 143: Preset Input Balance 2

    Changing these settings may seriously affect the performance of the projector. AUTION This adjustment is best done by a qualified service technician. What can be done? The convergence of the projected image can be adjusted in this menu. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 144: Diagnosis

    • SMPS Diagnosis 8.13.1 Starting Up Diagnosis What can be done? Following items can be checked using the Diagnosis menu: • C Bus • Formatter Board • Switch Mode Power Supply (SMPS) Board R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 145: C Diagnosis

    Scroll with ↑ or ↓ <EXIT> to return <EXIT> to return Menu 8-33 Menu 8-34 8.13.3 Formatter Diagnosis What can be done? This info screen will give an overview of the status of the Formatter board. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 146: Smps Diagnosis

    0 and 13 and all projectors must have the same baudrate. What can be done? DynaColor™ will eliminate channel-to-channel color variations. How to define color? The CIE chromaticity diagram is one way to plot the colors the human eye can see. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 147 A projector can only reproduce a certain color gamut within this diagram. This color gamut is defined by the triangle formed by the x, y coordinates of Red Green and Blue. These parameters are used by the DynaColor™ adjustment in the Barco Galaxy WARP™...
  • Page 148 This will execute the Linked Dynacolor™ command, all projectors in the linked setup will be set to their Common Color Gamut. DYNACOLOR COLOR COORDINATES EXEC. LINKED DYNACOLOR Select with ↑ or ↓ then <ENTER> <EXIT> to return Menu 8-41 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 149: Standard Source Files

    8. Fpix MHz: pixel frequency 9. Ftot : total pixels on one horizontal line. 10. Pact: active pixels on one horizontal line. 11. Ltot: total lines in one field 12. Lact: active lines in one field. R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 150 A. Standard Source Files R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...

  • Page 151: Index

    Common Fine 83–91 Address Bow Linearity 86–87 Changing Adjustment Common Address Selection Communication 23, 125 Horizontal Linearity 84–85 Connections Adjustment Protocol Selection RCVDS05 Local 90–91 Configuration 11, 29, 126 Adjustment Single CADWall Selection R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 152 21, 41, 120 Restricted Access 5, 10 Connections Logo 136–138 Hardwired Remote Barco 136–138 Slots Background Input 1 Hot Key Input 2 Shift Input 3 Starting Up Input Balance 58, 61, 138 Status 58, 138 R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 153 Connections 27–28 Random Access 45–46 Multi-Channel Start Up Single Channel Random Access Overview Invert 33, 38, 40–41 Mode Hardwired Remote Options Point 38, 40 Starting Up IR Sensors Phase Reflective Screen Set Up R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 154 Index Subpixel Switching off 20, 36 WARP1 Switching On 19, 35 Edit Switching to standby 20, 36 WARP2 Synchronous Edit Mode Windowing 61–62 Blanking Start Up Temperature Ambient Transport Delay Z-axis adjustment R5976698 BARCO GALAXY WARP™ 10 HB 05/04/2004...
  • Page 155 Revision Sheet Barco nv Simulation Products Noordlaan 5, B-8520 Kuurne Phone: +32 56.36.82.11, Fax: +32 56.36.84.86 E-mail: info@barco.com, Web: www.barco.com From: Date: Please correct the following points in this documentation (R5976698/00): page wrong correct R5976698 B WARP™ 10 HB 05/04/2004...

Table of Contents