Do you have a question about the SC-411RS-10 14 and is the answer not in the manual?
Questions and answers
Summary of Contents for Carson SC-411RS-10 14
Page 1
INSTALLATION AND OPERATING INSTRUCTIONS Carson is a trademark of Carson Manufacturing Company, Inc. Sound Hazard - Sound level from siren speaker (>120dBA @ 10 feet) may cause hearing damage. Do not operate siren without adequate hearing protection for you and anyone in immediate vicinity.
Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice. Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
SC-411RS-10 Installation and Operating Instructions Page 3 of 12 GENERAL DESCRIPTION The SC-411RS Remote Light Control/Siren is a premium unit designed for one or two 100W speaker use. The primary operating modes are Radio, Cycler, Standby, Yelp, Wail, and Phaser. A Noise Canceling PA Override and push-button Horn Override are available in all modes except Radio.
Page 4 of 12 Installation and Operating Instructions SC-411RS-10 INSTALLATION Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious damage to the unit or vehicle and may void warranties.
SC-411RS-10 Installation and Operating Instructions Page 5 of 12 AMPLIFIER WIRING DIAGRAM Aux switch 3 output Aux switch 4 output Aux switch 2 output Aux switch 5 output Aux switch 1 output Aux switch 6 output Right arrow stick Lever switch 1 output Left arrow stick Lever switch 2 output Center arrow stick (if needed)
OUT/DIM for 3 seconds, saving the settings—the unit will emit a long beep. NOTE: Press and hold the left directional indicator button for 3 seconds to reset to factory default. Program Mode Sections Press Lever Display Programming CARSON YELP PHSR OUT/DIM WAIL CYCLE STBY RADIO 0↓...
SC-411RS-10 Installation and Operating Instructions Page 7 of 12 Option Set 1 S1 (CUTOUT Input), S2 (SIRCTRL Input), S3 (LITCTRL Input) - These inputs are Press Lever Switch = OFF Shows blinking normally activated by a 12V input (ON). 0↓ On (Default) Cutout Input Active + Press the switch once until it FLASHES to...
Page 8 of 12 Installation and Operating Instructions SC-411RS-10 OPERATION This unit is designed for easy operation under the stress associated with high-speed pursuit. Most siren func- tions are accessible with one simple motion. Certain operational features or controlled by option settings and/or installation connections.
Do the aux switch indicators light? not working Loose aux switch output connection Is the corresponding fuse blown? PARTS The following parts are available from Carson Manufacturing Company, Inc.: Part Description ED1943 Kit, Control Head Mounting (2-brackets, screws and lockwashers) ED1944 Kit, Lever Switch Replacement (Includes mounting screws &...
Page 11 of 12 RETURN If you have any questions concerning this or any other Carson product, please contact our Technical Service Department at (888) 577-6877. Many issues can be handled over the phone. We can also be reached via e- mail at service@carson-mfg.com...
Page 12 of 12 Installation and Operating Instructions SC-411RS-10 INSTALLATION CONFIGURATION RECORD Terminal AWG Color Connected to Terminal AWG Color Connected to POS (2) GND (2) POWER RADIO (2) BACKLIT LITCTRL SIRCTRL CUTOUT SPKR (2) VIDEO RGT-A LFT-A CTR-A S1—S6 Operation: Blank=Default, V=No Video, M=Momentary, 10 or 20=Hold Time Lever / S1 - S6 Switch Association: Blank=None, #=Pos Operation...
Need help?
Do you have a question about the SC-411RS-10 14 and is the answer not in the manual?
Questions and answers