OPERATIONS
Read this first
These operations are accessible by remote control.
Some may also be accessible by controls on the main
unit.
Watching a TV Programme
To select a channel
Use
repeatedly to select your desired
channel, or use the Number buttons to enter a
specific channel number, then press OK for quicker
access.
(e.g.) If you want to select the channel 24 without
pressing OK, press 2 first, then press 4 within 3
seconds.
To adjust the volume
Use
to increase / decrease the audio
volume.
Press
to turn the sound on / off temporarily.
• You can recover the original volume by pressing
or
.
Favorite
You can easily locate a favorite channel.
• You can set favorite channel at "[Programme Edit]" (p. 18).
1
Press FAV while watching a programme to show
the favorite channel list.
2
Use
/
to select the channel you want, then
press OK.
1 TF1 HD
2 France 2 HD
6 M6HD
• Use FAV
to select the favorite channel while
watching a programme.
• Use
to move to the previous or next page.
• This unit need few seconds to memorise the favorite
setting.
• If you unplug the AC power cord immediately after the
setting, It will not be registered in the memory.
3
Press EXIT to exit.
Favorite List
ATV
ATV
ATV
OK
Sleep Timer
The sleep timer can be set for the unit to go to the
standby mode after an incremental period of time.
1
Press SLEEP repeatedly to change the sleep
time period.
• Each time you press SLEEP, the timer increases from
10 minutes up to 240 minutes.
• Press SLEEP repeatedly until [Off] appears to cancel the
sleep timer.
• If the unit goes into standby mode, the sleep timer will be
cancelled.
Switching the Input Mode
You can select a desired input mode from available
sources.
1
Press INPUT.
2
Use
/
then press OK.
again
Picture Format
You can select a desired TV screen size. Press
ASPECT button repeatedly to switch the TV screen
display mode.
Available options are as mentioned below.
SD:
[16:9], [4:3], [Zoom1], [Zoom2]
HD:
[16:9], [4:3], [Just Scan]
PC:
[16:9], [4:3]
• You cannot set screen display mode in playback mode.
• You can set another way at "[Aspect Ratio]" (p. 21).
to select the input mode you want,
Input Source
ATV
AV
YPbPr
HDMI
PC
Media
Enter
OK
13