Table of Contents
Advertisement
System (continued)
Alarm Display Setting
This item is used to switch the display to the picture input
with alarm signal in the single screen display or split screen
display which has been pre-set. When another alarm signal is
input during alarm recording, the picture with the latest alarm
signal appears in the single screen display or split screen dis-
play. The screen returns to its original display when the alarm
recording is completed.
The alarm display setting is available for either output A or B.
Select the desired output for alarm display. You cannot use
alarm display on both output A and B at the same time.
Setup Menu
System
4
Multiplexer Setting
5
4
1. Select output A or output B.
step
Off: Does not perform alarm display.
2. Select the desired single screen display or split
step
screen display which is set in the <Multiplexer
Setting> to be displayed when the alarm signal is
input for each sensor connected.
Covert Camera Setting
This item is used to set the picture of the specifi ed camera
number not to be displayed regardless of the presence of
video signals.
1
- -
9
13
When the picture is interrupted due to the camera trouble,
etc. while the <Covert Camera Setting> is set to "Off,"
the warning message does not appear on the screen.
And the buzzer does not sound even when "Warning" is
set for "Buzzer" setting. The unit registers this error in the
<System Log List>, however, the CALL OUT signal is not
output.
When setting <Covert Camera Setting> to "Off" for a
camera which is set for recording operation, recording is
performed without displaying the picture on the screen.
When <Covert Camera Setting> is set to "Off," the play-
back picture is not displayed and the screen turns blue
for that camera number. To display the playback picture,
switch the setting to "On."
In alarm display setting function, single screen display
is not displayed for the camera number of which covert
camera setting is "Off."
66
Alarm Display Setting
2
4
3
6
- -
8
10
11
12
14
15
16
Setup Menu
4
System
5
Multiplexer Setting
5
Covert Camera Setting
1. Set the covert camera setting for each camera
step
number.
On: Displays the picture supplied from the camera.
Off: Does not display the picture supplied from the
camera and the screen of that camera turns blue.
Setup Menu
Advertisement
Table of Contents
